676002

BenQ LH770 Manual

33
Zoom out
Zoom in
Previous page
1/76
Next page
English
33
If you forget the password
If the password function is activated, you will be asked to enter
the six-digit password every time you turn on the projector.
If you enter the wrong password, the password error message
as pictured to the right displays lasting for three seconds, and
the message ‘INPUT PASSWORD’ follows. You can retry by
entering another six-digit password, or if you did not record the
password in this manual, and you absolutely do not remember
it, you can use the password recall procedure. See “Entering the
password recall procedure” on page 33 for details.
Password Error
Please Try again.
If you enter an incorrect password 5 times in succession, the projector will automatically shut down in a
short time.
Entering the password recall procedure
1. Press and hold AUTO on the projector or remote
control for 3 seconds. The projector will display a coded
number on the screen.
2. Write down the number and turn off your projector.
3. Seek help from the local BenQ service center to decode
the number. You may be required to provide proof
of purchase documentation to verify that you are an
authorized user of the projector.
INPUT PASSWORD
MENU
EXIT
Please write down the recall code, and
contact BenQ Customer Center.
Recall Code:
Changing the password
1. Open the OSD menu and go to the SYSTEM SETUP: Advanced > Security Settings >
Change Password menu.
2. Press MODE/ENTER. The message ‘INPUT CURRENT PASSWORD’ displays.
3. Enter the old password.
y If the password is correct, another message ‘INPUT NEW PASSWORD’ displays.
y If the password is incorrect, the password error message displays lasting for three seconds,
and the message ‘INPUT CURRENT PASSWORD’ displays for your retry. You can press
MENU/EXIT to cancel the change or try another password.
4. Enter a new password.
The digits being input will display as asterisks on-screen. Write your selected
password down here in this manual in advance or right after the password is entered
so that it is available to you should you ever forget it.
Password: _ _ _ _ _ _
Keep this manual in a safe place.
5. Re-enter the new password to conrm it.
6. You have successfully assigned a new password to the
projector. Remember to enter the new password next time
the projector is started.
7. To leave the OSD menu, press MENU/EXIT.
The password has been changed
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ LH770 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ LH770 in the language / languages: English as an attachment in your email.

The manual is 14,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info