636255
11
Zoom out
Zoom in
Previous page
1/42
Next page
Preparing the camera for use 3
English
Preparing the camera for use
Use only the specified battery for the camera, and always turn off the camera before
removing the battery.
Indicator State Description
Status LED No light The digital camera is off.
Solid green The digital camera is ready to capture images.
Blinking green The digital camera is powering on and cannot focus
or capture video clips, or is in the power-saving
mode.
The flash is charging, or the USB communication/
transfer is in progress.
Self-timer LED Blinking red The self-timer function is activated.
It is normal for the camera to become warm during operation, because the camera
casing can conduct heat.
The LCD display on this camera is manufactured with sophisticated technology, and
more than 99.99% of the pixels on the LCD display meet standard specifications. Yet, it
is possible that less than 0.01% of the pixels on the LCD display may have some light
spots or show unusual colors. This is normal and does not indicate display
malfunction, nor will this affect the pictures you take with the camera.
The LCD monitor looks darker in strong sunlight or bright light. This is not a
malfunction.
To prevent your images from being blurred while pressing the shutter button, always
hold the camera steady. This is especially important when you are shooting under low
lighting conditions, under which your camera may reduce the shutter speed to ensure
your images are properly exposed.
A
To install the battery:
1. Open the battery cover (A).
2. Insert the battery in the correct direction by matching
the + - label on the battery cover (B).
3. Push the battery all the way down.
4. Close the battery cover (D).
B
E1250_E1280_UM - EN.book Page 3 Friday, February 5, 2010 4:44 PM
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ E1280 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ E1280 in the language / languages: English as an attachment in your email.

The manual is 4,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info