140583
23
Zoom out
Zoom in
Previous page
1/50
Next page
Using the remote control 19
English
The program indicator icon on the top right corner of the screen shows either '-' or '--' to
indicate which entry mode is selected.
Using the program / buttons to sequentially change programs
Press the Program / buttons on your remote control, or press the Program or
Program buttons on the display to sequentially cycle through your TV programs.
Using the recall button to return to the previous viewed program
To return to the previous viewed program, press the Recall button on your remote control.
This button can be used to toggle between the two most recently viewed programs without
having to press the precise program number.
Selecting a picture mode
To select a picture mode, press the Preset button on the remote control. This enables you to
select from the following settings:
Using the freeze function
Press the Freeze / button on the remote control to freeze the image on the screen. Press
the Freeze / button again to restore normal viewing.
This freeze function does not control the input source which will continue normally, but not be
displayed whilst the image remains frozen. When the image freeze is stopped, normal play will
resume in real time. That is, the displayed image will jump to the current time and any interim
video is not displayed.
Adjusting aspect ratio
There may be situations where you select an image source which has a different aspect ratio to
your screen. This model display has a true widescreen TV 16:9 aspect ratio, and so when viewing
4:3 aspect images like those from the built-in analog TV tuner, the screen will not be filled.
Should you wish to stretch or resize the image to fill the screen, you can use the Aspect /
button on the remote control to select an aspect ratio you prefer. It will cycle through the
following display aspect ratios for each press of the button:
The items available will depend on the input source being selected. See "Aspect ratio behaviour"
on page 41 for details.
Using the PIP function
If your display is connected to both a Video and a Graphic source, pressing the PIP button
allows you to display both images on the screen at the same time in PIP (Picture In Picture)
mode.
Full Screen: Normal display.
Video On Graphic: Display the Video picture in a window inserted over the Graphics picture.
• Video image sources: TV (ATV), Composite Video (AV1, AV2, AV3 and AV4), Interlaced RGB
Component Video (AV1-RGB ) and S-Video (AV2-S, AV3-S and AV4-S).
• Graphic image source: PC.
• If the display is set to Video On Graphic mode while the graphic image source cannot be
detected, the Video picture will not be displayed either.
• The Teletext function is not available in the Video image in PIP mode.
•Standard
Cinema
Dynamic
•Personal
16:9
4:3
•Letterbox
•Wide
Real
DV3251-En.book Page 19 Monday, December 12, 2005 4:07 PM
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ dv 3251 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ dv 3251 in the language / languages: English as an attachment in your email.

The manual is 3,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info