100307
8
Zoom out
Zoom in
Previous page
1/32
Next page
English
Preparing Your Camera for Use4
The camera must be used with the specified charger set. Damage caused by the use of an
incorrect charger set is not covered under the warranty. Always make sure that the
camera is off before removing the battery.
The battery may be warm after being charged or used. This is normal and not a
malfunction.
When using the camera in cold environments, keep the camera and its battery warm by
holding it inside your jacket or other warm protective environment.
2.3 Inserting and Removing an SD Memory Card
The camera is equipped with internal memory, allowing you to record video clips, capture
images, or make voice files in the camera. You can also expand the memory capacity by using
an optional SD (Secure Digital) memory card to store more files.
1. Always make sure the camera is turned off
before inserting or removing a memory card.
2. Insert an SD memory card in the correct
direction, as shown in the illustration.
3. Close the battery/SD memory card cover.
To remove the SD memory card, make sure the
camera is turned off. Press lightly on the edge of
the memory card and it will eject.
Be sure to format the SD memory card with this
camera before the initial use.
To prevent valuable data from being accidentally
erased from an SD memory card, you can slide
the write-protect tab (on the side of the SD
memory card) to “LOCK”.
To save, edit, or erase data on an SD memory
card, you must unlock the card.
While formatting the internal memory, do not insert a memory card into the camera.
Otherwise, the memory card is formatted instead of the camera’s internal memory.
Formatting is an irreversible action and data cannot be recovered at a later time. Back up
your data before formatting.
An SD memory card having read or write problems may not be properly formatted.
2.4 Setting the Date and Time
Before using your camera for the first time, please set the date and time. For more
information, refer to the table in 3.4.1 “Setup Mode Menu” on page 20.
DC_X710_UM.book Page 4 Monday, September 25, 2006 3:06 PM
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ DC X710 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ DC X710 in the language / languages: English as an attachment in your email.

The manual is 3,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BenQ DC X710

BenQ DC X710 User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info