636249
7
Zoom out
Zoom in
Previous page
1/28
Next page
BenQ DC 5530 Users Manual
English
Preparing Your DC E43 for Use
3
2 PREPARING YOUR DC E43 FOR USE
2.1 Inserting the Battery
1. Turn the camera off.
2. Slide open the battery/SD card cover on
the side of the camera.
3. Insert the battery in the direction of the
arrow with the correct polarity into the
battery compartment.
4. Close the battery/SD card cover.
To remove the battery, open the battery
compartment and press the orange battery
release switch. The battery pops out.
2.2 Charging the Battery
A brand new battery or one that has not been used for an extended period of time might
affect the number of pictures that can be taken. Therefore, to maximize its performance and
lifetime, we recommend that you fully charge the battery and discharge it for at least one
complete cycle before use. Using the optional AC power adapter charges the battery. Make
sure that the camera’s power is off and then insert the battery before starting.
1. Insert the conversion adapter into the conversion adapter
terminal of the camera as shown in the illustration.
2. Insert one end of the AC power adapter into the DC IN
terminal of the conversion adapter.
3. Insert the other end of the AC adapter into a wall outlet.
4. The viewfinder LED flashes green when charging starts
and lights green when fully charged. It lights red when a
charging error occurs.
It is recommended to fully discharge the battery before being
charged. Charging time varies according to the ambient
temperature and the battery status. If you want to use the camera when the battery charging
is in progress, use the camera with the AC power adapter connected.
Notes
Use only the specified battery type.
If you are not going to use the battery for an extended period of time, remove it
from the camera to prevent leakage or corrosion.
Avoid using the battery in extremely cold environments as low temperatures can
shorten the battery life and reduce camera performance.
Battery
release
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ DC E43 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ DC E43 in the language / languages: English as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BenQ DC E43

BenQ DC E43 User Manual - German - 28 pages

BenQ DC E43 User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info