100268
33
Zoom out
Zoom in
Previous page
1/35
Next page
BenQ DC 5530 Users Manual
English
Troubleshooting 29
6 TROUBLESHOOTING
Symptoms Causes Solutions
The power won’t turn
on.
The battery is out of power.
The USB cable is not properly
connected to the camera or PC.
First turn on the PC, then connect
the camera and PC with the USB
cable.
The power turns off
during use.
The battery is out of power.
Power Saving mode is enabled.
The battery cover is opened when in
use.
Switch on the power.
Do not open the battery cover when
the camera is in use.
The battery power is
being used up too
quickly.
The external temperature is too
cold.
The battery is not used for a long
time.
Keep the camera away from extreme
temperatures.
The camera does not
take pictures when the
shutter button is
pressed.
The camera is not in Capture Mode.
The battery is weak.
The power has not been switched
on.
Set the Mode switch to Capture
mode.
Replace the battery.
Switch on the power.
The close-up image is
blurred.
Select the correct focus range. If the subject is within 40 to 60 cm,
select Macro mode.
The flash does not fire. The camera flash is turned off.
The light source is sufficient.
The flash is not fully charged.
Set the flash mode to Auto Flash
mode.
Wait for the flash to fully charge.
There is something
wrong with the color
of the captured image.
White balance is not set properly. Set the white balance to Auto mode
or other suitable mode.
The picture is too
bright or too dark.
There is excessive or inadequate
exposure.
Reset EV bias value.
The LCD screen is not
clear.
The LCD screen plastic cover is
dirty.
The LCD screen has hot spots.
Clean the LCD screen with a soft
cloth.
Hot spots are normal and do not
affect the camera’s functionality.
The camera cannot
download images to
the PC.
The cable is not connected properly.
The camera is off.
OS is not Windows 98SE
/2000/ME/XP or the PC is not
equipped with a USB port.
USB driver is not installed
(Windows 98SE only).
Check the cable connection.
Turn on the power.
Install Windows 98SE/2000/ME/XP
and USB port.
Install the USB Driver (Windows
98SE only).
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ DC E300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ DC E300 in the language / languages: English as an attachment in your email.

The manual is 2,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BenQ DC E300

BenQ DC E300 User Manual - Dutch - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info