636341
36
Zoom out
Zoom in
Previous page
1/39
Next page
English
Troubleshooting28
5 Troubleshooting
Refer to the symptoms and solutions listed below before shipping your camera for service. If
the problem persists, contact your local reseller or service center.
Symptom Cause Solution
The camera cannot be
powered up.
There is no battery or the battery is
not inserted correctly.
Insert the battery correctly.
The battery has no power. Replace with new batteries.
The battery power is
draining quickly.
The external temperature is
extremely low.
Many shots are being captured in
dark places, requiring a flash.
A rechargeable battery was used and
it was not fully charged.
The battery has not been used for an
extended period of time after being
charged.
Fully charge the rechargeable battery
and discharge it for at least one
complete cycle before use.
The battery or camera
is warm.
The camera or flash was used
continuously over a long period of
time.
The flash does not
fire.
The flash does not
recharge.
The camera flash is turned off. Set the flash to Auto Flash.
The light source is sufficient.
The flash is not available in some
modes.
Even though the flash
fired, the image is
dark.
The distance to the subject is greater
than the flashs effective range.
Get closer to the subject and shoot.
The image is too
bright or too dark.
The exposure is excessive or
inadequate.
Reset exposure compensation.
I cannot format a
memory card.
The memory card is
write-protected.
Remove the write protection.
End of the memory card life. Insert a new memory card.
Colors of the images
taken are not shown
properly.
White Balance was not set properly
when the images were taken.
Select a suitable White Balance
setting before taking each picture.
I cannot print images
with PictBridge-
compliant printers.
The camera is connected to the
printer when the camera is powered
off.
Turn on the camera, select USB >
Printer, and then connect to the
printer.
DSC_C1020_UM CD EN.book Page 28 Monday, March 2, 2009 12:00 PM
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ DC C1020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ DC C1020 in the language / languages: English as an attachment in your email.

The manual is 6,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info