636341
30
Zoom out
Zoom in
Previous page
1/39
Next page
English
Using the Camera22
3.8.1 Playing back images
1. Turn the power on, and set the camera to the playback mode.
The most recently captured image appears on the LCD monitor.
If there are no images stored, the message
[No image] appears.
2. Press the four-way control.
[ ] displays the previous image.
[ ] displays the next image.
• Holding down [ ] or [ ] scrolls images at high speed.
3.8.2 Playing back movie clips
1. Turn the power on, and set the camera to the playback mode.
2. Press [ ] or [ ] to select a movie clip that you want to playback.
3. Start playing back.
Press [ ] to start playing the movie clip.
Press to stop the movie clip, or press [ ] to pause it. Press [ ] again to
resume.
• During movie playing back, press [ ] to fast forward or press [ ] to rewind.
• While pausing video playback, you can press the shutter to capture the video frame as a
still image in the VGA format.
• While pausing video playback, you can view the video frame by frame. Press [ ] to fast
forward one frame, or press [ ] to rewind one frame. Press and hold [ ] to fast forward
frame by frame continuously, or press [ ] to rewind frame by frame continuously.
3.8.3 Adjusting the playback volume
1. Turn the power on, and set the camera to the playback mode.
2. Press [ ] or [ ] to select a video clip, audio clip, or voice memo that you want to
playback.
3. Adjust the volume.
Press to increase the volume.
Press to decrease the volume
• The volume can be set during play/pause, but not during rewind/fast forward.
3.8.4 Magnifying & trimming still images
1. Turn the power on, and set the camera to the playback mode.
2. Select an image.
Press [ ] or [ ] to select the image that you want to magnify or trim.
Only still images can be magnified and trimmed.
3. Magnify the image.
Press to magnify the image, and the central portion of the image is displayed.
You can use the four-way control to view different parts of the magnified image.
DSC_C1020_UM CD EN.book Page 22 Monday, March 2, 2009 12:00 PM
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ DC C1020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ DC C1020 in the language / languages: English as an attachment in your email.

The manual is 6,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info