636341

BenQ DC C1020 Manual

5
Zoom out
Zoom in
Previous page
1/39
Next page
• Do not drop, knock, or shake the camera. A rude behavior of using the camera may
damage the internal electronic circuit board, deform the lens shape, or make the lens
unretractable.
• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the
camera.
• Finger grease may be left on the camera lens and will result in unclear images or
videos. To avoid this problem, be sure to clean the camera lens before taking pictures
or recording videos. You should also clean the camera lens on a regular basis.
• If the lens is dirty, use a lens brush or soft cloth to clean the lens.
• Do not touch the lens with your fingers.
• If a foreign substance or water gets in your camera, please turn the power off
immediately and disconnect the battery and the power adapter. Next, remove the
foreign substance or water and send it to the maintenance center.
• Whenever there is data in the internal memory or the external memory card, you
should make a backup copy to a computer or disc. So, you can have a backup
solution if data loss occurs.
• If the lens cannot retract into the camera, please replace the battery first (usually this
is because of a drained battery). Then the lens should retract automatically. If the
lens still cannot retract, please contact your dealer.
• Under no circumstances should you push the lens back manually as this may
damage the camera.
• All original accessories are designed only for use with this camera model you
purchased. Do not use these accessories to other camera models or cameras of other
brands to avoid unpredictable danger or damage.
• Before initial use of a memory card, always format the card first using the camera.
• Remember to slide the write-protect tab (if available) to the unlock position.
Otherwise, all data (if any) on the memory card is protected and the card cannot be
edited or formatted.
Operating environment
• Do not use or store your camera in the environments listed below:
• Direct sunlight
• Dusty places
• Next to an air conditioner, electric heater or other heat sources
• In a closed car that is in direct sunlight
• Unstable locations
• Do not use your camera outdoors when it is raining or snowing.
• Do not use your camera in or near water.
• The camera operating temperature is between 0 and 40 degrees Celsius. It is normal
for the operating time to be shortened when the temperature is low.
• The capacity of your camera battery will reduce each time it is charged/emptied.
Storage at too high or low temperatures will also result in a gradual capacity loss. As
a result, the operating time of your camera may be considerably reduced, even after a
full recharge of the battery.
• It is normal for the camera to become warm during operation, because the camera
casing can conduct heat.
DSC_C1020_UM CD EN.book Page 5 Monday, March 2, 2009 12:00 PM
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ DC C1020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ DC C1020 in the language / languages: English as an attachment in your email.

The manual is 6,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info