Manual Benning ST 750A (page 38 of 58) (English)

577368

Zoom out

Zoom in

1/58

08/ 2012 38 / 58



BENNING ST 750 A

12. Carrying out the Integrated Automatic Test

Test samples already existing in a database can be tested rapidly by means of the automatic test.

The sequence described here applies to an already existing database (name), customer (name)

with registered test samples (ID no.). After pressing <Automatic Test> in the start menu, select the

following in the menu displayed:

- Selection of the database (name), only specific customers!

- Selection of the customer (name), only specific test samples!

- Selection of the test sample (ID no.), depending on the customer / database!

- Selectthetestsampleinthe"IDno."lineandmarkitbymeansoftheinputstylus.

Now, the menu of the selected test sample opens. The values are highlighted in grey colour and

cannot be modiedin this menu!After pressing the <Start> button, rstthe "Visual Inspection"

menuisdisplayed.Conrmitbypressingabutton.Afterapositivetestandpressingabutton,a

connection test is started. The test is intended to determine whether a dangerous contact voltage

is applied, whether a test sample is connected and to make sure that there is no short-circuit. After

a positive connection test, the measurement is started. In case of a negative connection test (e.g.

open switch), an information message is displayed. The individual tests (depending on the pre-set-

tingofthetestprocedure)aredisplayedsubsequentlyandpartlyhavetobeactivatedorconrmed

by pressing the <Start> button (also see description of the individual measuring types, chapter 8). In

case of faulty individual results that are dangerous, the measurement will be interrupted immediate-

ly. By pressing the <Pause> button, it is possible to interrupt measurement so that e.g. the test cable

with the alligator clip or probe tip can be connected to another measuring point without resulting in

incorrect measurements / indications.

Attention!Themainsvoltageappliedtothetestsamplewillpersistduringthe"Testinterrupted"mes-

sage! Incorrect measured values can be deleted by pressing the <Reset> button. After the test has

beensuccessfulandisnished,the"TestsampleOK"menuisdisplayed.Itispossibletodisplaythe

results by pressing <Meas. Value> and to save them by pressing <Save>, <Yes>). The measuring

data will be stored in the selected database (name) and can be read out via a PC.

12.1 Searching Test Samples

By meansof the elds ( ) "DisplayAll"and "Next Test",you canselect the test samples ofa

specic"Database" and the corresponding "Customer"whichshallbetestedonaspecicdate.

Untick the box (  ) "Display All" and enter the corresponding date in the eld

"NextTest"bymeansofthecalendarfunction.Theresultisshownintheelds"No.ofTestSamples"and

"IDno.".Itispossibletolterandsearchfordifferentparameterslikee.g.theIDno.bymeansof

the"SearchField".

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Benning ST 750A in the language / languages: English as an attachment in your email.

The manual is 7,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Benning ST 750A

Benning ST 750A User Manual - German - 68 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Benning ST 750A Manual

Product: