577368
6
Zoom out
Zoom in
Previous page
1/58
Next page
08/ 2012 6 / 58
BENNING ST 750 A
2. Applicable Regulations
Measurements / tests Testers and measuring equipment
DIN VDE 0701 – 0702
DIN EN 62353 (VDE 0751-1)
(medicine)
ÖVE E 8701-1
(similar to VDE 0701 and 0702)
ÖVE E 8701-2–2
(similar to VDE 0701 and 0702)
BetrSichV
TRBS 1201
TRBS 1203, Part 3
BGV A3
DIN VDE 0404, Part 1
DIN VDE 0404, Part 2
DIN VDE 0404, Part 3 (medicine)
DIN VDE 0404, Part 4
DIN EN 60529 (VDE 0470, Part 1)
DIN EN 61010-1 (VDE 0411, Part 1)
DIN EN 61010-2-032 (VDE 0411, Part 2-032)
DIN EN 61010-031 (VDE 0411, Part 031)
DIN EN 61326 -1 (VDE 0843, Part 20-1)
DIN EN 61557-1 (VDE 0413, Part 1)
DIN EN 61557-2 (VDE 0413, Part 2)
DIN EN 61557-4 (VDE 0413, Part 4)
3. Product Description
The BENNING ST 750 A Appliance Tester has been developed for making the following measure-
ments for safety-related testing of electrical appliances in compliance with DIN VDE 0701-0702
(BGV A3) and DIN VDE 0751-1:
- measurement of the protective conductor resistance with compensation of the measuring line
- measurement of the insulating resistance
- measurement of the protective conductor current (alternative leakage current measurement,
direct current measurement or differential current measurement method)
- measurement of the contact current (alternative leakage current measurement, direct current
measurement or differential current measurement method)
- measurement of the device leakage current (alternative leakage current measurement, direct
current measurement or differential current measurement method)
- measurement of the leakage current of the applied part (alternative leakage current measure-
ment or direct current measurement method)
- functional test with measurement of input voltage, input current, effective power and apparent
power
- testing of IEC leads and extension cables
3.1 Scope of Delivery
The scope of delivery of the BENNING ST 750 A includes:
1 x BENNING ST 750 A Appliance Tester
1 x 2 GB SD memory card
2 x 1 m connecting cable with 4 mm safety plug
1 x IEC connecting cable (for line test)
2 x safety probe tip (red, yellow) with 4 mm safety jack
2 x alligator clip (red, black) with 4 mm safety jack
1 x input stylus
1 x operating manual
3.2 Transport / Storage /Operating Conditions
The device is designed for being operated under the following conditions:
Ambient conditions: height up to 2000 m above sea level
Temperature range: 0 to 35 °C (operating temperature)
- 20 to 60 °C (storage temperature)
Max. relative humidity: 80 % to 30 °C, linearly decreasing
60 % to 40 °C, non-condensing
Under the carrying handle, the device is provided with a manual pressure valve: Turn it to the right
(in clockwise direction) to close the valve (CLOSE) and to see a red indicator triangle. Turn it to
the left (in counter-clockwise direction) to open the valve (OPEN) and to see a green indicator
triangle. To protect the device and for long transport, it is recommended to close the valve. To open
thedevice,rstopenthevalve(forpressurecompensation)andthenopenthecover.Pleasealso
refertochapter20("TechnicalData").Pleasekeeptheoriginalpackagingforlaterdispatch,e.g.for
calibration. Transport damage due to improper packaging are excluded from warranty. Please store
the appliance tester under dry conditions in closed rooms. If the device has been transported at
extreme temperatures, it needs an acclimatization phase of at least two hours before switching it on.
3.3 Model and Type Designation
A type plate indicating the series number is located inside the housing (on the left next to the con-
nections for peripheral devices). If you have any queries, please always state the product designa-
tion and the series number.
3.3.1 Environmental Protection
At the end of product life, dispose of the unserviceable device via appropriate collecting
facilities provided in your community.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Benning ST 750A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Benning ST 750A in the language / languages: English as an attachment in your email.

The manual is 7,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Benning ST 750A

Benning ST 750A User Manual - German - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info