577356
32
Zoom out
Zoom in
Previous page
1/71
Next page
01/ 2015
BENNING ST 725
23
It may be assumed that safe operation is no longer possible:
- if the instrument show visible signs of damage
- if the appliance tester no longer functions
- after long periods of storage under unfavourable conditions
- after being subjected to rough transport
- the device is exposed to moisture.
In order to prevent danger
- do not touch the bare measuring probe tips of the measuring leads,
- plug the leads into the correspondingly marked jacks at the measuring
instrument
Maintenance:
Do not open the tester, because it contains no components which can be
repaired by the user. Repair and service must be carried out by qualified
personnel only!
Cleaning:
Regularly wipe the housing by means of a dry cloth and cleaning agent. Do not
use any polishing agents or solvents!
3. Scope of delivery and optional accessories
The scope of delivery for the BENNING ST 725 comprises:
3.1 One BENNING ST 725,
3.2 One test lead with alligator clip,
3.3 One IEC power cord (IEC adapter cable)
3.4 One mains connection cable
3.5 One compact protective pouch,
3.6 One USB connecting cable (A plug to Micro-B plug),
3.7 Six 1.5-V-batteries/ type AA (IEC LR6) fitted in the unit as initial equipment,
3.8 One operating manual
3.9 One CD-ROM with download/driver software, multilingual operating manual and
information material
Parts subject to wear:
- The BENNING ST 725 is provided with two fuses for overload protection:
twofuseswithanominalcurrentof16A,250V,F,breakingcapacity≥500A,D=5mm,L=
20 mm (part no. 10019440)
- The BENNING ST 725 is supplied by six 1.5 V batteries/ type AA (IEC LR6).
Note on optional accessories:
- Portable printer BENNING PT 1 for printing test records rapidly on site, direct thermal
printing process, incl. Mains supply unit and rechargeable Ni/MH battery pack (044150)
- Rolls of thermographic paper (20 pieces), roll width / length: 58 mm /13 m (044151)
- Test badges "next test", 300 pieces (756212)
Passive measuring adapters:
- Measuring adapter for single- and three-phase loads (passive, without mains voltage-
dependent switching devices) for R
PE
, R
ISO
(insulating resistance) and I
EA
(alternative
leakage current) measurements:
- 16 A CEE coupling (3-pin) - 16 A shock-proof plug (044143)
- 32 A CEE coupling (3-pin) - 16 A shock-proof plug (044144)
- 16 A + 32 A CEE coupling (5-pin) + 16 A CEE coupling (3-pin) - 16 A shock-proof plug
(044147)
- 16 A CEE coupling (5-pin) - shock-proof plug (044122)
- 32 A CEE coupling (5-pin) - shock-proof plug (044123)
Active measuring adapters:
- Measuring adapter for three-phase loads (active, with mains voltage-dependent switching
devices) for R
PE
and I
PE
measurements (direct measurement) under operating conditions:
- 16 A CEE adapter (5-pin), active (044140)
- 32 A CEE adapter(5-pin), active (044141)
As an alternative:
- BENNING CM 9 leakage current clamp for measuring the differential current, protective
conductor current and load current of single-phase and three-phase loads (044065)
- Measuring adapter for BENNING CM 9 leakage current clamp, conductors led through
individually, with double insulation:
- 16 A shock-proof coupling - 16 A shock-proof plug (044131)
- 16 A CEE coupling (5-pin) - CEE plug (5-pin) (044127)
- 32 A CEE coupling (5-pin) - CEE plug (5-pin) (044128)
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Benning ST 725 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Benning ST 725 in the language / languages: English, German, French as an attachment in your email.

The manual is 10,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info