577840
4
Zoom out
Zoom in
Previous page
1/14
Next page
Automatic measurement (Vo/c, Is/c, R
ISO
)
Attention:
Maximum DC power: P ≤ 10 kW, Vo/c ≤ 1000 V, Is/c ≤ 15 A
Do not make measurements at PV strings which are connected in parallel!
1. Connect the BENNING PV 1-1 to the PV generator as shown, by means of
the enclosed PV safety measuring leads and the red 4 mm safety test lead.
2. The open-circuit voltage (Vo/c) is automatically displayed.
3. In case of reversed polarity of the DC voltage, the symbol is displayed and
the measurement will be blocked.
4. Use the
V
ISO
-key to select 250 V, 500 V or 1000 V insulation test voltage.
5. Press the
Auto
-key to automatically measure short-circuit current (I
S/C
) and
insulation resistance (R
ISO
).
Note:
The red 4 mm safety measuring lead is required for the insulation resistance
measurement.
500V
250V 1000V
PV 1-1
DIN EN 62446 (VDE 0126-23), ÖVE/ÖNORM EN 62446
Auto
Ω
NULL
R
PE
V
ISO
ON/OFF
press 2 sec.
NULL
red redblack
Null balance of the measuring leads, resistance (R
PE
)
1. Connect the safety measuring leads to the red and black 4 mm test sockets of
the BENNING PV 1-1.
2. Hold the test probe tips together or connect together using the supplied
crocodile clips.
3. Press and hold the
Ω
NULL
-key until an acoustic signal sounds and the
Ω
NULL
-symbol
is displayed.
4. The Null-value is stored when unit is switched off.
5. To disable, press
Ω
NULL
-key until the
Ω
NULL
-symbol is removed from LC display.
Note:
Max. measuring lead resistance: 10 Ohm
500V
250V 1000V
PV 1-1
DIN EN 62446 (VDE 0126-23), ÖVE/ÖNORM EN 62446
Auto
Ω
NULL
R
PE
V
ISO
ON/OFF
press 2 sec.
NULL
red black
Protective conductor resistance (R
PE
)
1. Connect the 4 mm safety measuring leads as shown.
2. To make a single measurement (2 sec.), press and release the
R
PE
-
key.
3.
To make a continuous measurement, press and hold the
R
PE
-key until the symbol
is displayed continuously.
4. Press the
R
PE
-
key to terminate the continuous measurement.
500V
250V 1000V
PV 1-1
DIN EN 62446 (VDE 0126-23), ÖVE/ÖNORM EN 62446
Auto
Ω
NULL
R
PE
V
ISO
ON/OFF
press 2 sec.
NULL
R
PE
red
black
AC/DC current measurement
1. Disconnect all safety measuring leads from the BENNING PV 1-1.
2. Connect the BENNING CC 3 (option) current clamp adapter to the 4 mm test
sockets.
3. Select the 40 A range on the BENNING CC 3.
4. Press the null balance key (ZERO) of the BENNING CC 3 for approx. 2
seconds.
5. Press the
V
ISO
-key on the BENNING PV 1-1 until the symbol is
displayed.
6. The AC/DC current can be measured in single-wire live conductor.
500V
250V 1000V
PV 1-1
DIN EN 62446 (VDE 0126-23), ÖVE/ÖNORM EN 62446
Auto
Ω
NULL
R
PE
V
ISO
ON/OFF
press 2 sec.
+
40A : 10mV/A
300A : 1mV/A
BATT
LOW
PWR
ON
BENNING CC 3
ZERO A
OFF
40A
300A
CAT. III 600V
300A
NULL
AC/DC voltage measurement
1. Disconnect the PV safety measuring leads from the BENNING PV 1-1.
2. Connect the red and black safety measuring lead as pictured.
3. The BENNING PV 1-1 automatically measures the AC/DC voltage at the
measuring probes.
4. The polarity of the DC voltage is displayed by “+/-“. In case of AC voltage,
“+/-“ will be displayed alternately.
500V
250V 1000V
PV 1-1
DIN EN 62446 (VDE 0126-23), ÖVE/ÖNORM EN 62446
Auto
Ω
NULL
R
PE
V
ISO
ON/OFF
press 2 sec.
NULL
c
Max.
P ≤ 10 kW
Vo/c ≤ 1000 V
Is/c ≤ 15 A
Max.
CAT III 400 V
Option:
40 m measuring leads
BENNING TA 5
part no. 044039
Option:
BENNING CC 3
part no. 044038
PV-module/ -string
PV-module/ -string
09/ 2012
BENNING PV 1-1
309/ 2012
BENNING PV 1-1
2 09/ 2012
BENNING PV 1-1
4
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Benning PV 1.1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Benning PV 1.1 in the language / languages: Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 19,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Benning PV 1.1

Benning PV 1.1 User Manual - English, German - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info