692252
12
Zoom out
Zoom in
Previous page
1/56
Next page
02/ 2016
BENNING MM 6-1/ 6-2
D
12
- Schutzart: IP 30 (DIN VDE 0470-1 IEC/ EN 60529)
3 - erste Kennziffer: Schutz gegen Zugang zu gefährlichen Teilen und Schutz
gegen feste Fremdkörper, > 2,5 mm Durchmesser
0 - zweite Kennziffer: Kein Wasserschutz,
- Arbeitstemperatur und relative Luftfeuchte:
Bei Arbeitstemperatur von 0 °C bis 30 °C: relative Luftfeuchte kleiner 80 %,
Bei Arbeitstemperatur von 30 °C bis 40 °C: relative Luftfeuchte kleiner 75 %,
Bei Arbeitstemperatur von 40 °C bis 50 °C: relative Luftfeuchte kleiner 45 %,
- Lagerungstemperatur: Das BENNING MM 6-1/ MM 6-2 kann bei Tem pe-
ra turen von - 20 °C bis + 60 °C (Luftfeuchte 0 bis 80 %) gelagert werden.
Dabei sind die Batterien aus dem Gerät herauszunehmen.
7. Elektrische Angaben
Bemerkung: Die Messgenauigkeit wird angegeben als Summe aus
- einem relativen Anteil des Messwertes und
- einer Anzahl von Digit (d.h. Zahlenschritte der letzten Stelle).
Diese Messgenauigkeit gilt bei Temperaturen von 18 °C bis 28 °C und einer
relativen Luftfeuchtigkeit kleiner 80 %.
Der Messwert wird als echter Effektivwert (TRUE RMS, AC-Kopplung) gewon-
nen und angezeigt. Rechtecksignale sind nicht spezifiziert. Bei nicht sinusförmi-
gen Kurvenformen wird der Anzeigenwert ungenauer. So ergibt sich für folgende
Crest-Faktoren ein zusätzlicher Fehler:
Crest-Factor von 1,0 bis 2,0 zusätzlicher Fehler + 3,0 %
Crest-Factor von 2,0 bis 2,5 zusätzlicher Fehler + 5,0 %
Crest-Factor von 2,5 bis 3,0 zusätzlicher Fehler + 7,0 % (gültig bis 4000 Digit)
7.1 Gleichspannungsbereiche DC
Der Eingangswiderstand beträgt 10 MΩ.
Überlastschutz: 1000 V
AC/DC
Messbereich OL Anzeige Auflösung Messgenauigkeit
6,000 V 6,600 V 0,001 V ± (0,5 % des Messwertes + 5 Digit)
60,00 V 66,00 V 0,01 V ± (0,5 % des Messwertes + 5 Digit)
600,0 V 660,0 V 0,1 V ± (0,5 % des Messwertes + 5 Digit)
7.1.1 Gleichspannungsbereich mV DC
Der Eingangswiderstand beträgt 10 MΩ.
Überlastschutz: 1000 V
AC/DC
Messbereich OL Anzeige Auflösung Messgenauigkeit
600,0 mV 660,0 mV 0,1 mV ± (0,5 % des Messwertes + 8 Digit)
7.2 Wechselspannungsbereiche AC
Der Eingangswiderstand beträgt 10 parallel < 100 pF.
Überlastschutz: 1000 V
AC/DC
Messbereich OL Anzeige Auflösung
Messgenauigkeit
im Frequenzbereich 45 Hz - 500 Hz (Sinus)
600,0 mV 660,0 mV 0,1 mV ± (1,0 % des Messwertes + 8 Digit)*
6,000 V 6,600 V 0,001 V ± (1,0 % des Messwertes + 5 Digit)
60,00 V 66,00 V 0,01 V ± (1,0 % des Messwertes + 5 Digit)
600,0 V 660,0 V 0,1 V ± (1,0 % des Messwertes + 5 Digit)
* Messbereich ab ≥ 1,0 mV
7.3 AutoV, LoZ-Bereich
Der niederohmige Eingangswiderstand von ca. 3 kΩ bewirkt eine Unterdrückung
von induktiven und kapazitiven Spannungen.
Überlastschutz: 1000 V
AC/DC
Messbereich OL Anzeige Auflösung
Messgenauigkeit
im Frequenzbereich 45 Hz - 500 Hz (Sinus)
600,0 V 660,0 V 100 mV ± (2,0 % des Messwertes + 5 Digit)*
1000 V 1100 V 1 V ± (2,0 % des Messwertes + 5 Digit)
* Messbereich ab ≥ 1,0 V
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Benning MM6.1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Benning MM6.1 in the language / languages: English, German, Dutch, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info