692213

Benning MM 5-2 Manual

23
Zoom out
Zoom in
Previous page
1/134
Next page
10/ 2015
BENNING MM 5-1/ 5-2
24
Measuring
range
OL indication Resolution
Measurement accuracy
in frequency range 45 Hz - 500 Hz (sine)
6 A 6.600 A 0.001 A ± (1.5 % of reading + 5 digits)*
10 A 20.00 A 0.01 A ± (1.5 % of reading + 5 digits)
* Measuring range from ≥ 20 mA
7.5 Resistance ranges
Overload protection: 600 V
AC/ DC
Measuring range OL indication Resolution Measurement accuracy
600.0 Ω 660.0 Ω 0.1 Ω ± (0.5 %
of reading + 5
digits
)
6.000 kΩ 6.600 kΩ 0.001 kΩ ± (0.5 %
of reading + 2
digits
)
60.00 kΩ 66.00 kΩ 0.01 kΩ ± (0.5 %
of reading + 2
digits
)
600.0 kΩ 660.0 kΩ 0.1 kΩ ± (0.5 %
of reading + 2
digits
)
6.000 MΩ 6.000 MΩ 0.001 MΩ ± (0.5 %
of reading + 2
digits
)
40.00 MΩ 40.00 MΩ 0.01 MΩ ± (1.0 %
of reading + 5
digits
)
*
* Measured values > 10 MΩ might cause changing values on the display
(max. ± 50 digits).
7.6 Diode testing
Overload protection: 600 V
AC/ DC
Max. no-load voltage: 1.8 V
Measuring range OL indication Resolution Measurement accuracy
1.500 V 1.550 V 0.001 V ± (1.0 %
of reading + 3
digits
)
7.7 Continuity testing
Overload protection: 600 V
AC/ DC
The built-in buzzer sounds in the case of a resistance R less than 30 Ω up
to 200 Ω. For a resistance R higher than 200 Ω, the buzzer does not emit an
acoustic signal.
Measuring range OL indication Resolution Measurement accuracy
600.0 Ω 660.0 Ω 0.1 Ω ± (0.5 % of reading + 5 digits)
7.8 Capacity ranges
Conditions: capacitors discharged and connected in accordance with the polar-
ity stated.
Overload protection: 600 V
AC/ DC
Measuring range OL indication Resolution Measurement accuracy
50.00 nF 55.00 nF 0.01 nF ± (2.0 % of reading + 10 digits)
500.0 nF 550.0 nF 0.1 nF ± (2.0 % of reading + 5 digits)
5.000 µF 5.500 µF 0.001 µF ± (2.0 % of reading + 5 digits)
50.00 µF 55.00 µF 0.01 µF ± (2.0 % of reading + 5 digits)
500.0 µF 550.0 µF 0.1 µF ± (2.0 % of reading + 5 digits)
1000 µF 1100 µF 1 µF ± (2.0 % of reading + 5 digits)
7.9
Frequency ranges
Overload protection: 600 V
AC/ DC
Measuring range OL indication Resolution Measurement accuracy
100.00 Hz 100.00 Hz 0.01 Hz ± (0.2 % of reading + 2 digits)
1000.0 Hz 1000.0 Hz 0.1 Hz ± (0.2 % of reading + 2 digits)
10.000 kHz 10.000 kHz 0.001 kHz ± (0.2 % of reading + 2 digits)
50.00 kHz 50.00 kHz 0.01 kHz ± (0.2 % of reading + 2 digits)
Minimum frequency: 10 Hz
Minimum sensitivity: > 4 V
eff
for V
AC
(10 Hz - 10 kHz)
> 20 V
eff
for V
AC
(10 kHz - 50 kHz)
> 0,6 A
eff
for A
AC
(10 Hz - 50 kHz)
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Benning MM 5-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Benning MM 5-2 in the language / languages: English, German, Dutch, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 5,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info