577341
13
Zoom out
Zoom in
Previous page
1/169
Next page
4
D
geeignet.
5.1.16 Das BENNING MM 1-1/ 1-2/ 1-3 kann durch eine ausklappbare Stütze
aufgestellt oder durch die Aufhängevorrichtung befestigt werden.
5.1.17
Das
BENNING MM 1-1/ 1-2/ 1-3
besitzt kopfseitig einen Aufnahmesen-
sor als Spannungsindikator zur Lokalisierung von geerdeten Wechsel-
spannungen.
6. Umgebungsbedingungen
- Das BENNING MM 1-1/ 1-2/ 1-3 ist für Messungen in trockener Umgebung
vorgesehen,
- Barometrische Höhe bei Messungen: Maximal 2000 m,
- Überspannungskategorie/ Aufstellungskategorie: IEC 60664-1/ IEC 61010-1
→ 600 V Kategorie III; 1000 V Kategorie II,
- Verschmutzungsgrad: 2,
- Schutzart: IP 30 DIN VDE 0470-1 IEC/EN 60529
IP 30 bedeutet: Schutz gegen Zugang zu gefährlichen Teilen und Schutz
gegen feste Fremdkörper > 2,5 mm Durchmesser, (3 - erste Kennziffer).
Kein Wasserschutz, (0 - zweite Kennziffer).
- Arbeitstemperatur und relative Luftfeuchte:
Bei Arbeitstemperatur von 0 °C bis 30 °C: relative Luftfeuchte kleiner 80 %,
Bei Arbeitstemperatur von 31 °C bis 40 °C: relative Luftfeuchte kleiner 75 %,
Bei Arbeitstemperatur von 41 °C bis 50 °C: relative Luftfeuchte kleiner 45 %,
- Lagerungstemperatur: Das BENNING MM 1-1/ 1-2/ 1-3 kann bei
Temperaturen von - 15 °C bis + 60 °C (Luftfeuchte 0 bis 80 %) gelagert
werden. Dabei ist die Batterie aus dem Gerät herauszunehmen.
7. Elektrische Angaben
Bemerkung: Die Messgenauigkeit wird angegeben als Summe aus
- einem relativen Anteil des Messwertes und
- einer Anzahl von Digit (d.h. Zahlenschritte der letzten Stelle).
Diese Messgenauigkeit gilt bei Temperaturen von 18 °C bis 28 °C und einer
relativen Luftfeuchtigkeit kleiner 80 %.
7.1 Gleichspannungsbereiche
Der Eingangswiderstand beträgt 10 MΩ.
Messbereich
*3
Auflösung Messgenauigkeit Überlastschutz
200 mV 100 µV ± (0,5 % des Messwertes + 2 Digit)
1000 V
DC
2 V 1 mV ± (0,5 % des Messwertes + 2 Digit)
1000 V
DC
20 V 10 mV ± (0,5 % des Messwertes + 2 Digit)
1000 V
DC
200 V 100 mV ± (0,5 % des Messwertes + 2 Digit)
1000 V
DC
1000 V 1 V ± (0,5 % des Messwertes + 2 Digit)
1000 V
DC
7.2 Wechselspannungsbereiche
Der Eingangswiderstand beträgt 10 MΩ parallel 100 pF.
Messbereich
*3
Auflösung
Messgenauigkeit *
1
im Frequenzbereich 50 Hz - 300 Hz
Überlastschutz
200 mV 100 µV ± (2,0 % des Messwertes + 5 Digit) *
2
750 V
eff
2 V 1 mV
± (1,5 % des Messwertes + 5 Digit) 750 V
eff
im Frequenzbereich 50 Hz - 500 Hz
20 V 10 mV
± (1,5 % des Messwertes + 5 Digit) 750 V
eff
200 V 100 mV
± (1,5 % des Messwertes + 5 Digit) 750 V
eff
750 V 1 V
± (1,5 % des Messwertes + 5 Digit) 750 V
eff
Der Messwert des BENNING MM 1-1/ 1-2/ 1-3 wird durch Mittelwertgleich-
richtung gewonnen und als Effektivwert angezeigt.
*1
Die Messgenauigkeit ist spezifiziert für eine Sinuskurvenform. Bei nicht
sinus förmigen Kurvenformen wird der Anzeigewert ungenauer. So ergibt
sich für folgende Crest-Faktoren ein zusätzlicher Fehler:
Crest-Factor von 1,4 bis 3,0 zusätzlicher Fehler ± 1,5 %
Crest-Factor von 3,0 bis 4,0 zusätzlicher Fehler ± 3 %
*2
Gültig für Sinuskurvenform 50 Hz/ 60 Hz
*3
Bei der automatischen Bereichswahl (AUTO) kann der Umschaltpunkt
bereits bei einem Wert von 1400 liegen!
09/ 2013
BENNING MM 1-1/ 1-2/ 1-3
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Benning MM 1.2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Benning MM 1.2 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 12,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info