577837
11
Zoom out
Zoom in
Previous page
1/24
Next page
BENNING IT 130 short instructions
- 10 -
1.9 Batteries and fuses
Batteries
Warning:
Disconnect all test cables / accessories from the tester and from the installation and
switch the tester off before opening the cover of the battery / fuse compartment.
Dangerous voltages might occur inside the tester!
Use alkaline batteries or rechargeable Ni-MH batteries (storage batteries) of the size AA
only! Do not recharge alkaline batteries!
Please make sure that the batteries / storage batteries are inserted with correct polarity,
because otherwise the tester cannot be operated and the batteries / storage batteries will
discharge.
If the tester will not be used for a longer period of time, remove all batteries / storage
batteries from the battery compartment in order to protect the tester against leakage of
the batteries / storage batteries.
The rechargeable Ni-MH batteries (storage batteries) will be recharged automatically as soon as the
charger is connected to the charging socket. An integrated protective circuit controls the charging
process.
Power supply socket polarity
Fuses
Warning:
Disconnect all test cables / accessories from the tester and from the installation and switch the
tester off before opening the cover of the battery / fuse compartment. Dangerous voltages may
be applied to the interior of the tester!
Replace the fuses removed with new fuses of exactly the same fuse type. An incorrect fuse
might affect the safety of the user and / or damage the tester.
There are three fuses under back cover of the BENNING IT 130 instrument.
F1
M 0,315 A / 250 V, 205 mm
This fuse is intended to protect the internal switching circuits for low-impedance measurement/
continuity test, if during measurement the probe tips are accidentally connected to the mains
voltage.
F2, F3
F 4 A / 500 V, 326,3 mm (breaking capacity: 50 kA)
General input protection fuses of test terminals L/L1 and N/L2.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Benning IT 130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Benning IT 130 in the language / languages: English as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Benning IT 130

Benning IT 130 User Manual - German - 85 pages

Benning IT 130 Quick start guide - German - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info