577837
8
Zoom out
Zoom in
Previous page
1/24
Next page
BENNING IT 130 short instructions
- 7 -
1.4 Indications and meaning of symbols
Terminal voltage monitor
The terminal voltage monitor displays on-line the voltages on the test terminals and information about
active test terminals in the AC installation measuring mode.
The voltage applied is displayed by means of the testing terminal symbol. All three
testing terminals L, N and PE are used for the selected measurement.
The voltage applied is displayed by means of the testing terminal symbol. The
testing terminals L and N are used for the selected measurement.
The testing terminals L and PE are active testing terminals. The testing terminal N
should be connected as well in order to have a correct input voltage.
The polarity of the testing voltage applied (R LOW, R ISO) is displayed at the
output terminals L and N.
Battery indication
Battery capacity indication.
Low battery.
The storage battery charge condition is too low to ensure correct measuring results.
Recharge the storage batteries or replace the batteries.
Charging in progress (if power supply adapter is connected).
Messages
Measurement is running, consider displayed warnings.
Conditions on the input terminals allow starting the measurement; consider other
displayed warnings and messages.
Conditions on the input terminals do not allow starting the measurement, consider
displayed warnings and messages.
RCD tripped-out during the measurement (in RCD functions).
Portable RCD selected (PRCD).
Instrument is overheated. The measurement is prohibited until the temperature
decreases under the allowed limit.
Result(s) can be stored.
High electrical noise was detected during measurement. Results may be impaired.
L and N are changed.
Warning! High voltage is applied to the test terminals.
Warning! Dangerous voltage on the PE terminal! Stop the activity immediately and
eliminate the fault / connection problem before proceeding with any activity!
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Benning IT 130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Benning IT 130 in the language / languages: English as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Benning IT 130

Benning IT 130 User Manual - German - 85 pages

Benning IT 130 Quick start guide - German - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info