Manual Benning Duspol Analog (page 39 of 50) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Spanish, Norwegian, Finnish)

577293

Zoom out

Zoom in

1/50

03/2014

DUSPOL

analog



Wyświetlaczpozostajewygaszony,jeślikierunekobrotuw

prawo nie zostanie rozpoznany.

- Kontrola polawirującego wymaga stale dalszejkontroli!

Jeśliwyświetlacz poprzez symbol „R“ pokazujekierunek

obrotuwprawo,toprzydalszejkontrolipozamianiekoń-

cówek L1/-

z L2/+

wyświetlaczpowinienbyćwyga-

szony.

 Jeśliwobydwuprzypadkachwyświetlaczpokazujesym-

bol„R“,toznaczy,żemamydoczynieniazezbytsłabym

uziemieniem.

Wskazówka:

Kontrola pola wirującego w uziemionej sieci prądutrójfazo-

wego (faza względemfazy) jestmożliwa od230 V - 900 V,

50/60Hz.Odzieżochronnaorazizolacyjnewarunkilokalizacji

mogąmiećwpływnatąfunkcję.

8. Dane techniczne

- Przepisy: DIN EN 61243-3: 2011, IEC 61243-3: 2009

- Zakresnapięciaznamionowego:12VdoAC/DC1.000V

- Zakresczęstotliwościznamionowejf:0do60Hz

- Maksymalnybłądwskazań:U

± 15 %, ELV U

+ 0% - 15%

- Rezystancjawewnętrznaobwodupomiarowego:180kΩ,

- Prąd pobierany obwodu pomiarowego: I

< 6,0 mA

(1.000 V)

Prądpobieranyobwoduobciążającego:I

< 550 mA (1.000 V)

- Wskaźnikbiegunowości:+24VLED,-24VLED,+12V

LED,-12VLED(przynaciśniętymklawiszu)

- Przewód zewnętrzny- (wskaźnik faz) oraz kontrola pola

wirującego:≥U

230 V, 50/60 Hz

- Silnikwibracyjny,rozruch:≥U

200 V

- Kategoriaprzepięcia:CATIV600V,

CAT III 1000 V

- Rodzaj ochrony: IP 65 (DIN VDE 0470-1 IEC/EN 60529)

 6 -pierwszy wskaźnik:zabezpieczenie przeddostępem

do niebezpiecznych części oraz ochrona przed stałymi

ciałamiobcymi,pyłoszczelne

 5–drugiwskaźnik:ochronaprzedstrumieniemwodnym.

Równieżprzyopadach.

- max. dopuszczalne Cykl pracy: 30 s (maks. 30 sekund),

240 s off

- ciężar:ok.250g

- długośćprzewodułączącego:750ms

- zakrestemperatury pracyoraz składowania: -20 °Cdo

+ 45 °C (kategoria klimatu N)

- względnawilgotnośćpowietrza:20%do96%(kategoria

klimatu N)

- czasy regulacji odwrotnej (ochrona termiczna):

 napięcie/czas:

230 V/30 s, 400 V/9 s, 690 V/5 s, 1000 V/2 s

9. Konserwacja ogólna

Proszęzewnętrznączęśćobudowyczyścićczystąorazsuchą

ściereczką.

10. Ochrona środowiska naturalnego

Poosiągnięciukońca żywotności urządzenianależy

jeoddaćwpunkcieprzeznaczonymdoutylizacjizu-

żytychnarzędziorazurządzeń.

Instrucţiuni de utilizare

DUSPOL

analog

Înainte de utilizarea testerului de tensiune DUSPOL

analog:

citiţicuatenţieinstrucţiuniledeutilizareşirespectaţineapărat

indicaţiileprivindsiguranţa!

Cuprins

1. instrucţiuni de siguranţă

2. descrierea aparatului

3. Test de funcţionare înainte de utilizare, pentru a verifi-

ca absenţa tensiunii unui dispozitiv

4. Verificarea lipsei tensiunii unui dispozitiv

5. Conexiune de sarcină cu motor de vibraţii

6. verificare ecran de fază

7. Verificare sens de rotaţie (succesiunea fazelor)

8. date tehnice

9. întreţinere generală

10. protecţia mediului înconjurător

1. instrucţiuni de siguranţă

- întimpulutilizăriisevorapucamânereleizolateL1

şi

L210;nusevoratingevârfurilemetalicedetestareL1/-

şiL2+

- Imediatînainteşidupăutilizare,aseverificafuncţionarea

testeruluidetensiune,pentruaverificaabsenţatensiunii

(asevedea3.)!Esteinterzisăîntrebuinţareatesteruluide

tensiunedacăunulsaumaimulteelementeindicatoarenu

afişeazăsaunusepoatestabilifuncţionalitateasa!Revi-

zuireatrebuiesăfierepetatădupăaceeacuuntesterde

tensiune diferit.

- Testeruldetensiunetrebuieîntrebuinţatnumaiînplajade

tensiunenominalădatăşiîninstalaţii cupânălaAC/DC

1000 V!

- Testeruldetensiunepoatefiîntrebuinţatîncategoriilede

tensiune de tip CAT III cu maximum de 1000 V sau CAT IV

cumaximum600V,întreconductorşiîmpământare.

Testerulde tensiune vafi întrebuinţat numaide personal

calificatşinumaisubcondiţiidesiguranţăîntimpullucrului.

- Indicatorii LED pentru trepte de tensiune servesc numai

pentruilustrareaplajeidetensiuneşinuînscopulefectu-

ăriidemăsurători.

- Crearea unui tester de tensiune pentru mai mult de 30

secundedetensiune(timpulmaximpentruţineresubten-

siunedupăcomutare,ED=30s)

- esteinterzisădemontareatesteruluidetensiune!

- Sevorevitamurdărireaşistricareacarcaseitesteruluide

tensiune.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Benning Duspol Analog in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Benning Duspol Analog Manual

Product: