577174
10
Zoom out
Zoom in
Previous page
1/97
Next page
09/ 2013
BENNING CM 1-1/ 1-2
4
D
6. Umgebungsbedingungen
- Das BENNING CM 1-1/ 1-2 ist für Messungen in trockener Umgebung vorge-
sehen,
- Barometrische Höhe bei Messungen: Maximal 2000 m,
- Überspannungskategorie/ Aufstellungskategorie: IEC 60664-1/ IEC 61010-1
→ 600 V Kategorie III,
- Verschmutzungsgrad: 2,
- Schutzart: IP 30 (DIN VDE 0470-1 IEC/ EN 60529)
3 - erste Kennziffer: Schutz gegen Zugang zu gefährlichen Teilen und
Schutz gegen feste Fremdkörper, > 2,5 mm Durchmesser
0 - zweite Kennziffer: Kein Wasserschutz,
- Arbeitstemperatur und relative Luftfeuchte:
Bei Arbeitstemperatur von 0 °C bis 30 °C: relative Luftfeuchte kleiner 80 %,
Bei Arbeitstemperatur von 31 °C bis 40 °C: relative Luftfeuchte kleiner 75 %,
Bei Arbeitstemperatur von 41 °C bis 50 °C: relative Luftfeuchte kleiner 45 %,
- Lagerungstemperatur: Das BENNING CM 1-1/ 1-2 kann bei Temperaturen
von - 20 °C bis + 60 °C (Luftfeuchte 0 bis 80 %) gelagert werden. Dabei ist
die Batterie aus dem Gerät herauszunehmen.
7. Elektrische Angaben
Bemerkung: Die Messgenauigkeit wird angegeben als Summe aus
- einem relativen Anteil des Messwertes und
- einer Anzahl von Digit (d.h. Zahlenschritte der letzten Stelle).
Diese Messgenauigkeit gilt bei Temperaturen von 18 °C bis 28 °C und einer
relativen Luftfeuchtigkeit kleiner 80 %.
7.1 Gleichspannungsbereiche ( BENNING CM 1-2)
Der Eingangswiderstand beträgt 10 MΩ
Messbereich Auflösung Messgenauigkeit Überlastschutz
200 V 0,1 V ± (1,0 % des Messwertes + 2 Digit) 600 V
eff
600 V 1 V ± (1,0 % des Messwertes + 2 Digit) 600 V
eff
7.2 Wechselspannungsbereiche ( BENNING CM 1-2)
Der Eingangswiderstand beträgt 10 M parallel 100 pF.
Messbereich Auflösung
Messgenauigkeit *
1
im Frequenzbereich 50 Hz - 500 Hz
Überlastschutz
200 V 0,1 V ± (1,5 % des Messwertes + 5 Digit) 600 V
eff
600 V 1 V ± (1,5 % des Messwertes + 5 Digit) 600 V
eff
*
1
Der Messwert wird durch Mittelwertgleichrichtung gewonnen und als Effektivwert
angezeigt. Seine Kalibrierung ist auf sinusförmige Kurvenform abgestimmt.
7.3 Wechselstrombereiche
BENNING CM 1-1
Messbereich Auflösung
Messgenauigkeit *
1
im Frequenzbereich 50 Hz - 60 Hz
Überlastschutz
20 A 0,01 A ± (3,0 % des Messwertes + 5 Digit) 600 A
eff
200 A 0,1 A ± (2,0 % des Messwertes + 5 Digit) 600 A
eff
400 A 1 A ± (2,0 % des Messwertes + 5 Digit) 600 A
eff
BENNING CM 1-2
Messbereich Auflösung
Messgenauigkeit *
1
*
2
im Frequenzbereich 50 Hz - 60 Hz
Überlastschutz
40 A 0,1 A ± (1,9 % des Messwertes + 10 Digit) 600 A
eff
200 A 0,1 A ± (1,9 % des Messwertes + 5 Digit) 600 A
eff
400 A 1 A ± (1,9 % des Messwertes + 5 Digit) 600 A
eff
*
1
Der Messwert wird durch Mittelwertgleichrichtung gewonnen und als Effektivwert
angezeigt. Seine Kalibrierung ist auf sinusförmige Kurvenform abgestimmt.
*
2
Die angegebene Genauigkeit ist spezifiziert für Leiter die mit der Messzange
L mittig umfasst werden (siehe Bild 4 Wechselstrommessung). Für Leiter,
die nicht mittig umfasst werden, muß ein zusätzlicher Fehler von 1,5 % des
Anzeigewertes berücksichtigt werden.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Benning CM1.1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Benning CM1.1 in the language / languages: English, German, Dutch, French, Italian, Polish, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 4,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info