693639
33
Zoom out
Zoom in
Previous page
1/39
Next page
33
All flammable substances must be at a minimum distance of 1500 mm from the boiler when
removing ash from the boiler. The ashes must be put into incombustible containers with lids.
When operating the boiler at a temperature below 60 °C, the steel boiler body is covered with
dew and so-called low-temperature corrosion occurs, which reduces its service life. Therefore,
the boiler must be operated at a temperature of 60 °C and higher.
After the heating season, it is necessary to thoroughly clean the boiler including the flue gas
duct. The boiler room must be kept clean and dry.
It is forbidden to interfere with the boiler structure and wiring.
The boiler is operated with a fan.
The boiler is operated at an overpressure at the flue gas outlet.
The boiler operates in conditions without condensation.
7.4. Residual risks and their prevention
Risks arising during operation of the boiler under the conditions of expected use and logically foreseeable
misuse have been minimized using currently available technology.
Despite its design, structure and technical features, during the operating life of a boiler certain residual risks
remain.
These risks in particular result from inattention by the boiler operator and failure to observe safety
rules during operation.
To further reduce these risks and ensure your safety we bring to your attention certain residual risks that
cannot be removed by any technical design.
a) Electrical risks
Mounting, maintenance and repairs of electrical parts of the boiler must be carried out only by
professionally qualified personnel in accordance with applicable technical regulations and standards;
Supply wiring must comply with applicable regulations;
Power supply cable and wiring of the boiler must be regularly checked and maintained in the
prescribed condition;
In the event of any damage to electrical equipment, the boiler must be shut down, unplugged from
the mains and a qualified repair must be undertaken;
It is forbidden to interfere with the wiring of safety circuits, or perform any unauthorized interventions,
which are related to the equipment’s safety and reliability.
b) Thermal risks
The boiler must not be exposed to higher working pressures than prescribed;
It is forbidden to overheat the boiler;
The boiler must be protected against low-temperature corrosion by a suitable connection with an
automatic return temperature protection;
The boiler can burn only specified fuel;
It is prohibited to store flammable liquids near the boiler;
Minimize the risk of ignition by setting suitable attenuation parameters;
During boiler operation pay maximum attention to the risk of burns from sources of heat.
c) Risks posed by fuel handling
Handling fuel results in emission of solid particles. Therefore, the operator should wear appropriate
protective equipment according to the degree of dust generation;
Because it is a fuel, it is necessary to observe appropriate fire regulations and keep a suitable
portable fire extinguisher accessible.
d) Ergonomic risks
The boiler must stand horizontally in the boiler room;
It is forbidden to put hands into the screw feeder;
All doors, lids and covers must be completely closed during boiler operation.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Benekov S16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Benekov S16 in the language / languages: English as an attachment in your email.

The manual is 1,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info