Manual Benekov R16 (page 19 of 41) (English)

693642

Zoom out

Zoom in

1/41

production of fixed and movable protective

covers

ČSN EN 1037+A1:2008 Machinery safety – Preventing unwanted start

ČSN EN ISO 12100-2011 Machinery safety - Basic definitions, general principles

of construction

ČSN EN ISO 13857:2008 Machinery safety – Safe distances to prevent

contact of upper or lower extremities with

dangerous places

5.2. Possibilities of placing

Placing of the boiler according to the power mains:

 The boiler must be placed in the way that the plug in the socket (230V/50 Hz)

is always accessible.

 The boiler is connected to the electric power network with a tight connected

cable terminated with a plug (according to the standards).

 Protection against electric shock must be ensured in compliance with the valid

ČSN EN standards (see chapter 5.1.)

Location of the boiler with respect to the fire regulations:

1. Location at the fire resistant floor

 Place the boiler at the fire safe isolating surface that overreaches the

platform of the boiler in all proportions at least for 20 mm.

 If the boiler is placed in the cellar it is recommended to place it at the

bedding (at least 50 mm height). The boiler has to be horizontally well

balanced, eventual unevenness could be removed with fine screwing of

the feet under the fuel container.

2. Safety zone from flammable materials

 During the installation and operation of the boiler, the safety distance

between boiler outer dimensions including smoke-flue and the

flammable materials (see detailed specification in ČSN EN 13 501-

1+A1:2010) must be kept at at least 400 mm.

Placing of the boiler according to the required free space – see fig. 7:

 basic setting AA5/AB5 according to ČSN 33 2000-1 ed.2:2009

 in front of the boiler manipulation area of minimum 1000mm is required

 the minimum distance between the back-side of the boiler and the wall is 400

 for case of removing of the worm feeder 500 mm distance between the wall

and the side of the boiler with the fuel container is needed

 At the side of the boiler’s body must be handling area at least 500 mm for the

possible cleaning of the heat-exchanger

 above the fuel container at least 350 mm is required for the possible full

opening of the feed device cover sheet

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Benekov R16 in the language / languages: English as an attachment in your email.

The manual is 1,99 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Benekov R16 Manual

Product: