693642
15
Zoom out
Zoom in
Previous page
1/41
Next page
4.2. Control, regulating and security devices
The control and regulation of the boiler is ensured by the instruction control unit -
see separate service instructions.
Security elements that control the safe boiler running:
Safety thermo regulator (safety switch) is used to prevent the heating
system from overheating. The safety switch is set from the producer to the top
temperature 95°C, i.e. to a higher temperature than the possible requested
temperature at the boiler.The safety thermo regulator is located under the front
panel on the console behind the instruction control unit.
Thermal overload (motor protection) is a part of the fuel feeding device
drive and ensures the protection against burn off especially in the case when
the feed device is blocked. This element also disconnects the ventilator to
prevent the fire penetration to the container. During the regular operation,
the temperature of the engine can reach 85°C - such a temperature is not a
sign of breakdown.
Turnstile is a device that mechanically separates the fuel in the container
from the fuel in the worm feeder. This technical solution ensures that if the fuel
in the worm feeder device burns up, there is no chance that the fire could
expand in the fuel container (especially in the case of long time power cut).
Limit switch of the fuel container cover serves for the shut - down of the
worm feeder and the ventilator when the fuel container cover is opened. This
prevents running of the boiler when the fuel container cover is opened. After
correct closing of the cover the boiler is set up for further use.
Emergency extinguishing system is noother security element that prevents
the burn up of the fuel back into the fuel container. When the temperature at
the bottom of the fuel container rises over 9C the thermostatic valve is
opened and the bottom of fuel container is filled with water form the water
supply system or from the installed water pressure tank.
Firing flap is placed among the second and third draught of the boiler in the
upper part of the lamella exchanger and enables to regulate the temperature
exiting exhausts.
During the boiler operation, when the temperature of exhausts raises over
100°C the firing flap must be closed, i.e. the cleaner and firing flap adjusting
handle on the side of the boiler must be turned in the downward direction
(towards the rear) and secured by means of the locking screw with plastic
head.
By firing (cold chimney) or during the long time minor load of the boiler it is
recommended to operate the boiler with the firing flap partly open to prevent
the exhaust temperature drop below 80°C. In this case it is necessary to turn
the cleaner and ignition handle in the upper direction (towards you) and secure
by means of the locking screw with plastic head.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Benekov R16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Benekov R16 in the language / languages: English as an attachment in your email.

The manual is 1,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info