693645

Benekov R100 Manual

10
Zoom out
Zoom in
Previous page
1/32
Next page
4.2. Control, regulating and security devices
The boiler is controlled and regulated by the control unit Siemens Climatix 2 - see separate service
instructions.
Security elements that ensure safe operation of the boiler:
• Safety thermo regulator (safety switch) is used to prevent the heating system from overheating.
In production, the safety switch is set to 95°C, i.e. to a higher temperature than the possible
operating temperature of the boiler. The safety thermo regulator is located on the side of the boiler
in the control unit switchboard.
• Thermal overload (motor protection) is a part of the fuel feeding device drive that protects it
from burn off, especially in the case when the feed device is blocked. This element also
disconnects the ventilator to prevent fire penetration to the container. During the regular operation,
the temperature of the engine can reach 85°C - such a temperature is not a sign of breakdown.
• Turnstile is a device that mechanically separates the fuel in the container from the fuel in the worm
feeder. This technical solution ensures that if the fuel in the worm feeder device starts burning, the
fire cannot expand in the fuel container (especially in the case of long time power cut).
• Emergency extinguishing system is another security element that prevents fire from expanding in
the fuel container. If the temperature at the bottom of the fuel container rises over 95°C, a paraffin
plug at the bottom of the container melts and the container is cooled with water from a plastic
reservoir. If the boiler is equipped with a thermostatic valve with pressure tank (optional) and the
temperature at the bottom of the fuel container rises over 95°C, the thermostatic valve opens and
the bottom of the fuel container is filled with water from the water supply system or from the
installed water pressure tank.
• Firing flap is placed among the second and third pass in the upper part of the boiler body and it
regulates the temperature of exhausts on output. During the boiler operation, when the temperature
of exhausts rises over 100°C, the firing flap must be closed, i.e. the firing flap adjusting handle on
the side of the boiler must be turned in the forward direction (towards you) and secured by means
of the locking screw with plastic head. When firing (cold chimney) or in cases when the boiler runs
on minimum power over longer periods of time, it is recommended to operate the boiler with the
firing flap partly open to prevent the exhaust temperature from dropping below 80°C. In this case, it
is necessary to turn the firing flap adjusting handle in the rearward direction and secure by means
of the locking screw with plastic head.
4.3. Accessories
Standard accessories:
• Instruction and operation manual with the certificate of warranty
• Instruction and operation manual for the boiler control unit
• List of service centres
• Rotary grate
• Combustion products extraction device
• Automatic ignition
• Ceramic reflector
• Cleaning rake
• Fire extinguishing device with paraffin plug
Optional accessories:
• Fire extinguishing device with thermostatic valve and pressure tank
• Additional module of fuel container
• Indoor thermostat or SIEMENS equithermal regulation
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Benekov R100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Benekov R100 in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info