733212

Ben-e-bike TWENTYSIX E-POWER PRO 2020 Manual

31
Zoom out
Zoom in
Previous page
1/67
Next page
31 BEN-E-BIKE INSTRUCTION MANUAL
AMPERUM GmbH
Stuttgarter Str. 72
D-78628 Rottweil
www.ben
-
e
-
bike.
info@ben-e-bike.com
ADJUSTMENT OF THE SUSPENSION FORK
If your BEN-E-BIKE is not equipped with a rigid but an air suspension fork, the stiffness of the fork can be adapted
to the driver's weight by changing the air pressure in the air chamber of the left fork leg.
If you want to change the spring stiffness of the suspension fork, you need a so-called "damper pump". If you
do not have such a pump, contact your dealer for help. Never use an ordinary tire pump or even a compressor
to pump up the suspension fork. Irreparable damage to the seals is pre-programmed in this case!
Please note that the fork should be already compressed slightly when sitting on the BEN-E-BIKE - this is the so-
called negative spring travel ("SAG"). If the air pressure is too high, you sacrifice a lot of riding comfort as the front
wheel loses contact to the ground more quickly. Useful is a negative spring travel of about 15 - 20%, which in the
case of the "SMOOTHER" fork means a compression of about 15 - 20mm.
For convenience the fork has a rubber ring on the left stanchion tube to facilitate the proper adjustment of the air
pressure:
• Push the rubber ring all the way down and place the BEN-E-BIKE in the unloaded state vertically.
• Now lift your child onto the saddle so that it does not touch the ground with the feet, but instead loads the
BEN-E-BIKE with all its weight, thereby compressing the suspension fork.
• If the air pressure in the fork is correct, it should be compressed by about 15 mm.
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ben-e-bike TWENTYSIX E-POWER PRO 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ben-e-bike TWENTYSIX E-POWER PRO 2020 in the language / languages: English as an attachment in your email.

The manual is 6,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ben-e-bike TWENTYSIX E-POWER PRO 2020

Ben-e-bike TWENTYSIX E-POWER PRO 2020 User Manual - German - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info