733212

Ben-e-bike TWENTYSIX E-POWER PRO 2020 Manual

19
Zoom out
Zoom in
Previous page
1/67
Next page
19 BEN-E-BIKE INSTRUCTION MANUAL
AMPERUM GmbH
Stuttgarter Str. 72
D-78628 Rottweil
www.ben
-
e
-
bike.
info@ben-e-bike.com
• Have your child practice emergency braking.
• Practice with your child how to handle the gear shift until he / she can operate the gear shift so that its
attention is not affected (see chapter "Operation >> Gear Shift").
• Do not allow your child to drive alone unless you can answer for it..
AFTER A FALL
After a fall or accident it hidden damage to the BEN-E-BIKE may arise, e.g. hairline cracks. Components made of
carbon, which have suffered a shock impact, as well as bent parts made of aluminium can break suddenly. It is not
allowed to straighten bent parts because those are then prone to break or fail. This is especially true for the fork,
the handlebar, the brake levers, the crank, the seat post and the pedals. When in doubt, replacing these parts is
always a better choice because your child's safety is of paramount importance.
• Have the BEN-E-BIKE inspected by your specialist dealer for possible damage after a serious fall or
accident.
• Do not straighten bent components.
• Damaged or bent components should be immediately replaced for original replacement parts by your
specialized dealer.
• Don't use the BEN-E-BIKE if any defect can be detected
• After minor falls, check all components of the pedelec, e.g. when the BEN-E-BIKE has toppled
• Make sure the chain is still in proper position on the front chainring and the sprockets of the rear cassette.
If the wheel has toppled to the right side, you should check the functionality of the derailleur. A bent rear
derailleur or a bent hanger can cause the rear derailleur (or the chain) to get into the spokes. There is then
acute danger of falling!
• In case of any doubt, contact your specialized dealer!
SPECIAL FEATURES OF CARBON MATERIALS
The carbon material of the handlebar offers some special features compared to other lightweight materials. It is of
major importance to be aware of these characteristics so that you can always rely on it. Carbon - if treated
properly - allows for extremely strong and highly resilient components with very low weight. A very special
feature, however, is its brittleness. Components made from carbon typically do not deform under heavy load,
although the internal structure may already be damaged. The fibres can in extreme cases separate from one
another, means the so-called delamination occurs, whereby the strength of the component decreases significantly.
Any overstressing that has already damaged the internal fibres is not indicated by any residual bending as this
happens with steel or aluminium components. For this reason, a carbon part can fail after an overload in
subsequent use, which can lead to the fall with unpredictable consequences. Have the affected component
inspected by your specialized dealer after a heavy fall!
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ben-e-bike TWENTYSIX E-POWER PRO 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ben-e-bike TWENTYSIX E-POWER PRO 2020 in the language / languages: English as an attachment in your email.

The manual is 6,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ben-e-bike TWENTYSIX E-POWER PRO 2020

Ben-e-bike TWENTYSIX E-POWER PRO 2020 User Manual - German - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info