733202

Ben-e-bike Twentyfour-six E-power Manual

23
Zoom out
Zoom in
Previous page
1/63
Next page
23 BEN
-
SETTING THE SEAT POSITION
The seat post may break during use
due to improper mounting. If you adjust the seat post, make sure that the
lower mark on the seat post (minimum insertion depth) is not visible (see arrow).
The saddle height should be adjusted so that your ch
not be maximally stretched in the lowest position of the crank. If the saddle is too high,
overcome
this lowest point. If the saddle is too deep, knee pain can be the res
unfavou
rable, which will result in a faster fatigue of
•
To adjust the seat height, loosen the screw o
tool: Allen key 4)
• Do not pull the seat
post beyond the
•
As a general rule, the seat post must be inserted at least 90mm into the seat tube.
•
The released seat post can now be shifted in height. Make sure that the part of the seat post that is insi
the seat tube is always well greased (for example, with silicone oil).
• If the seat
post does not slide easily in the seat tube, do not use force.
•
Align the saddle straight by aiming over the saddle tip along the top tube.
• Retighten the seat post clamp.
• Check if the
seat post is properly tightened
impossible, the post is
correctly
-
E-
BIKE INSTRUCTION MANUAL
AMPERUM GmbH
Stuttgarter Str. 72
D-78628 Rottweil
due to improper mounting. If you adjust the seat post, make sure that the
lower mark on the seat post (minimum insertion depth) is not visible (see arrow).
The saddle height should be adjusted so that your ch
ild can still reach the ground with the toes. The leg must then
not be maximally stretched in the lowest position of the crank. If the saddle is too high,
this lowest point. If the saddle is too deep, knee pain can be the res
ult. In addition, the leverage will be
rable, which will result in a faster fatigue of
your child.
To adjust the seat height, loosen the screw o
f the seat post clamp
by turning it
post beyond the
"minimum insertion depth
mark on the shaft.
As a general rule, the seat post must be inserted at least 90mm into the seat tube.
The released seat post can now be shifted in height. Make sure that the part of the seat post that is insi
the seat tube is always well greased (for example, with silicone oil).
post does not slide easily in the seat tube, do not use force.
Align the saddle straight by aiming over the saddle tip along the top tube.
To do this, turn its screw clockwise and fix
it with a torque of max. 5 Nm.
seat post is properly tightened
. Hold the saddle with your hands and try to twist it. If
correctly
fixed.
BIKE INSTRUCTION MANUAL
www.ben
-
e
-
bike.
net
info@ben-e-bike.com
due to improper mounting. If you adjust the seat post, make sure that the
ild can still reach the ground with the toes. The leg must then
not be maximally stretched in the lowest position of the crank. If the saddle is too high,
it won't be easy to
ult. In addition, the leverage will be
by turning it
counter clockwise (required
mark on the shaft.
As a general rule, the seat post must be inserted at least 90mm into the seat tube.
The released seat post can now be shifted in height. Make sure that the part of the seat post that is insi
de
it with a torque of max. 5 Nm.
. Hold the saddle with your hands and try to twist it. If
this is
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ben-e-bike Twentyfour-six E-power at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ben-e-bike Twentyfour-six E-power in the language / languages: English as an attachment in your email.

The manual is 7,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ben-e-bike Twentyfour-six E-power

Ben-e-bike Twentyfour-six E-power User Manual - German - 43 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info