733206
16
Zoom out
Zoom in
Previous page
1/67
Next page
16 BEN-E-BIKE INSTRUCTION MANUAL
AMPERUM GmbH
Stuttgarter Str. 72
D-78628 Rottweil
www.ben
-
e
-
bike.
info@ben-e-bike.com
BEFORE EVERY RIDE
The BEN-E-BIKE is exposed to constant vibration during use. As a result, excessive wear can occur or it can
loosen screw joints.
If in doubt, ask your dealer to show you how to test the BEN-E-BIKE.
Check the BEN-E-BIKE before each ride according to the test instructions.
Use the BEN-E-BIKE only if you do not notice any damage.
Only use the BEN-E-BIKE if there is no excessive wear and all screw joints are fastened properly.
Thoroughly check the BEN-E-BIKE for damage and excessive wear before your child uses the bike (see
chapter "Test Instructions").
Explain to your child that the BEN-E-BIKE should not be used if it is damaged.
TEST INSTRUCTIONS
Check before every ride:
that the quick release on the front wheel is closed and the front wheel is properly fixed.
whether the tires are in good condition and sufficiently inflated. Let both wheels turn to check the
concentricity.
the condition of the frame and components.
look at all components and watch out for deformations, cracks and discoloration.
Grasp the handlebar, pedals and saddle one at a time and check that all components are properly fixed.
the function of the brakes by pulling the brake levers and making sure that the wheel cannot be spun if the
brake is applied. It should be impossible to pull the brake levers completely to the handlebars. Watch out
that there is neither any brake fluid on the brake levers nor callipers.
the function of the lighting and bell (if retrofitted).
If the front quick release skewer is not properly tightened and thus the clamping force is too low, the front
wheel may come off. There is then acute danger of an accident!
The quick release skewer basically consists of the lever with eccentric for closing the quick release and the opposite
clamping nut, with which the preload is adjusted.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ben-e-bike TWENTY E-POWER 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ben-e-bike TWENTY E-POWER 2020 in the language / languages: English as an attachment in your email.

The manual is 6,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ben-e-bike TWENTY E-POWER 2020

Ben-e-bike TWENTY E-POWER 2020 User Manual - German - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info