818948

Belrobotics Parcmow Big Mow - BM1000 Manual

59
Zoom out
Zoom in
Previous page
1/78
Next page
Chapter 8 The user interface
Entries in normal text are available but which have not been used.
[*] indicates the actual network to which the robot is connected.
[!] indicates that the network to which the robot is connected, is not encrypted using
either WPA or WPA2 technologies. This is therefore an insecure network and the [!]
indicates a warning.
[-] indicates that the network has been disabled.
To connect to a different known network (BelRobotics in the example above), highlight
the network, press and select Enable Network .
To modify the current network, (BelRobotics Guest in the example above) highlight the
network, press . The following operations are available
-Disable Network : disconnects the robot from this network. This will be indicated by [-]
preceding the name of the network in the list.
-Change Password : allows you to modify the password to access the network from this
machine.
-Forget Network : removes the recognition of this known network from this robot.
Using the robot as a client
For normal operation it is recommended that you set up the robot as a WiFi client. This will
enable it to communicate with the portal on the web-server.
To set up the robot as a client
1. Press .
2. Highlight Connections and press .
3. Highlight Mode and set it to Client .
If the robot has not been connected to a WiFi network, selecting the option Search for
networks will search for networks and present a list of those available.
4. Highlight the WiFi network required and press .
5. Enter the password for the network using the keyboard.
6. Highlight V and press .
8.4.3 Operations
This menu enables you to set a number of operating parameters: .
Min temp
Sets the lowest temperature that the robot will operate at.
Note: Working at too low a temperature can damage the grass.
Edit parcels percentage
This option enables you to view and modify the percentage values (page 75) assigned
to each of the parcels that have been defined. The percentage value assigned to a parcel
determines the proportion of times the robot will start working in the parcel. A defined
schedule (page 49) for the robot to work in specific parcels will take priority over these
percentage values.
Big mow BM1000 User's Manual Version: Release 4.5.0 Last updated: 2022-08-21 59
… 59 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Belrobotics Parcmow Big Mow - BM1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Belrobotics Parcmow Big Mow - BM1000 in the language / languages: English as an attachment in your email.

The manual is 4.56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info