818966
65
Zoom out
Zoom in
Previous page
1/78
Next page
Chapter 9 Service and Maintenance
At the end of the season
-Battery (page 68).
-Wintering (page 68)
Regular cleaning (during wet weather)
During periods of wet weather it is necessary to ensure that mud and grass do not
accumulate on the moving parts: the wheels and the cutting heads. These should be
inspected and cleaned daily.
1. Hit the red button to stop the robot.
2. Turn the machine onto its rear side.
3. Switch the machine OFF.
4. Remove any accumulations of grass and dirt using a wire brush and/or a spatula.
5. Rub the body with a soft, damp cloth or sponge.
6. If the body is very dirty, use a soapy solution or washing-up liquid. Never use solvents!
Clean the charge contacts
This procedure should be performed weekly on both the robot and the charging station.
Charge contacts on the robot Charge contacts on the station
Rub the contact surfaces with grade 280 sandpaper until they appear clean.
Clean the bumper
This procedure should be performed weekly.
Check that the bumper material is intact; no cuts or tears. If it is, contact an authorized
technician.
Clean the bumper with a damp cloth.
Note: Do NOT use water.
Clean the sonar sensors
This procedure should be performed weekly.
The sonar sensors need to be kept clean if they are to operate properly. All need to work
properly. If any of the sensors are not operating properly an alarm is issued.
Big mow BM2000 User's Manual Version: Release 4.5.0 Last updated: 2022-08-20 65
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Belrobotics BM2000 Big Mow at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Belrobotics BM2000 Big Mow in the language / languages: English as an attachment in your email.

The manual is 4.37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info