818966

Belrobotics BM2000 Big Mow Manual

54
Zoom out
Zoom in
Previous page
1/78
Next page
Chapter 8 The user interface
resistance from long, dense grass is detected. The cutting heads will also be lowered when
the resistance has decreased.
The height of the blades can be defined for each parcel in which the robot is going to work.
The parcel in which the robot is currently located is termed the actual parcel.
Note: You should be aware that if the cutting height is set to 25mm or less, this will
result in increased wear of the white plastic cover of the anti-friction disc - see Figure
5: Detail of the cutting head (page 12). In this case, this part should be inspected
frequently (at least every 2 months) and replaced if necessary.
To set the cutting height
1. Press .
2. Press the up and down arrows to highlight Cutting height then press .
A screen appears, which shows the cutting height in the parcel in which the robot is
located.
Note: If this value is negative, it implies that a reset of the parameters has
taken place and that the blade height values need to be re-calibrated. Contact
Belrobotics (page 8).
3. Click Set target . A list of configured parcels and their cutting heights are displayed. In
this example it can be seen that the Active parcel is LOOP.
4. Highlight the parcel in which the cutting height is to be modified, then use the left and
right arrow keys to scroll to the required value. Press to set the new height.
If the height for the Active parcel is modified, the cutting heads will be raised or lowered.
If the height is modified in one of the other parcels, the cutting heads will be raised or
lowered when the robot enters the parcel.
54 Big mow BM2000 User's Manual Version: Release 4.5.0 Last updated: 2022-08-20
… 54 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Belrobotics BM2000 Big Mow at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Belrobotics BM2000 Big Mow in the language / languages: English as an attachment in your email.

The manual is 4.37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info