818965
25
Zoom out
Zoom in
Previous page
1/28
Next page
BIGMOW
Problems Situation Solution
1 The machine operates in
reverse
1 Bonnet position connectors clogged
up
1 Clean between the connectors and
chassis
2 Protective flange connector in contact 1 Press along full length of flange
from top to bottom to disconnect
2 Remove flange connector and test
without the connector. If the
problem persists, it is being
caused elsewhere in the machine.
If necessary, consult your local distributor
2 The machine constantly moves
slowly
1 The sonar is clogged (or damp, having
come into contact with water)
1 CAREFULLY clean the inside of the
sonar, including the inside of both
“eyes”
2 Interference 1 There is something in close
proximity reflecting the sonar’s
waves (on the bonnet?)
3 The sonar is out of position 1 Check that the sonar in properly
positing in its setting
4 The sonar is defective 1 Have it changed by a technician
If necessary, consult your local distributor
3 The machine is systematically
moving in squares
1 The grass is too long in one spot and
the machine is systematically dealing
with it.
1 Simply check that the grass in the
mowing area is not too long. If this
is the case, the user must start by
mowing at a greater height and
gradually lower the cutting heads
until the desired grass length is
achieved (this may take several
days)
If necessary, consult your local distributor
4 Machine Alarm Message:
Head blocked 1 The cut grass was too long and has
clogged up a cutting head
1 Clean the cutting head in question
2 Cutting motor is defective 1 Consult your local distributor, who
will change the defective
component
5 Machine Alarm Message:
Wheel blocked 1 The wheel is blocked by an object (e.g.
a branch)
1 Remove the object in question
2 Motor is defective 1 Consult your local distributor, who
will change the defective
component
6 Machine Alarm Message: Wire
not found 1 The recharging station is disconnected 1 Reconnect the plug
2 Wait for the network to become
live again
2 The wire has been cut 1 Call the local distributor to repair it
7 Machine Alarm Message:
Blocked 1 The machine is stuck between several
obstacles
1 If there are objects obstructing the
path and blocking manoeuvres,
2 The machine has a number of
magnetic field actions; check that
there are no metal objects in or on
the ground
If necessary, consult your local distributor
PAGE 25
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Belrobotics Big Mow USA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Belrobotics Big Mow USA in the language / languages: English as an attachment in your email.

The manual is 1.49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info