747150
16
Zoom out
Zoom in
Previous page
1/24
Next page
224 225
DE
DK
EN
ES
FI
FR
IT
JP
NL
Please note that if the tone control is on, the preset value will be changed as
soon as the Tone Control is changed in user mode.
Resetting to the factory setting
You can use this to reset all settings to the
standard settings that the products were supplied
with from the factory.
Press and hold down the + button (9) until all the
LEDs on the display are lit. After resetting is com
-
pleted, the display will blink for a short period.
Version information
The product version information is presented here
via a pattern of lit and blinking LEDs. This internal
information is only intended as an aid for servicing
and support.
Pairing of units
The Transmitter and Receiver Units in the Bellman Audio Domino system must
have the radio link established in order for radio communication to operate.
To make it easier to get started, a Receiver Unit and a Transmitter Unit which
are paired together are always supplied so that they will work together. Where
you want to pair a Receiver Unit with a Transmitter Unit which is dierent from
the Receiver Unit it was originally supplied with, you can do this in the Settings
Menu. Proceed as follows to pair up the units:
Start both the units with the
On/O buttons i (6, 18).
Go into the Settings Menu.
Hold down the
CONNECT
button (19) on the Trans-
mitter Unit.
Hold down both the M
button (5) and the R but-
ton (7) on the Receiver Unit.
A ”running light” on the Receiver Unit’s Volume and Tone LED Indicator (8)
moving towards the centre indicates that the link has been established.
Please note! If you pair up a Transmitter Unit and a Receiver Unit in the Set-
tings Menu, this replaces the pairing carried out in the factory. This can be
useful when changing a Transmitter Unit under guarantee or if you want to
pair up several Receiver Units to a Transmitter Unit (e.g. in a conference room).
8 s
5 s
5 s
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bellman Symfon BE2210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bellman Symfon BE2210 in the language / languages: Dutch as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bellman Symfon BE2210

Bellman Symfon BE2210 User Manual - All languages - 173 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info