747147
4
Zoom out
Zoom in
Previous page
1/11
Next page
22
23
EN
Charging
Mino is supplied with a built-in rechargeable battery. The battery must be charged
before using the product for the rst time. Mino contains a Lithium-Ion battery
and a universal charger.
Warning: The product may only be charged with the charger supplied or using
accessories from Bellman & Symfon.
Connect the charger as illustrated in the fold-out section of the manual.
Fit the plug and check that it is locked properly before it is connected to the
wall socket. When the charging connector is connected to the Charger and
Mino, the Battery Status LED (3) changes from green to orange to indicate that
charging is taking place. When charging is nished, after about 4 hours, the
LED turns green again.
Function
Connect BE9122 Bellman Stereo Headphones, BE9159 Bellman Neck Loop, BE9403
Bellman Stetoclip, BE9124 Bellman In-ear Phones or another listening product
recommended by Bellman & Symfon to the headphone output (13) on the
right-hand side as illustrated in the fold-out section of the manual.
Switching on
Press the On/O button
i
(6). The Battery Status LED (3) starts to shine with a
green light to indicate that the unit is on.
Mino always starts with the internal microphone selected as the sound source.
In addition, the volume control is always set to low volume to avoid unpleasant
sound levels.
Selecting the sound volume
Use the volume control’s
+ button (9) to increase and the - button (10) to
reduce the sound level. The Volume and Tone LED Indicator (8) shows the sound
level. The more LEDs that are lit, the higher the volume. The LED indicator goes
out 5 seconds after the sound volume has been set.
Selecting the tone
Use the tone control’s
< button (11) to reduce and the > button (12) to increase
the treble in the tone. The Volume and Tone LED Indicator (8) shows the selected
setting. The LED indicator goes out 5 seconds after the sound quality has been set.
Switching off
When you have nished, you can switch o Mino by pressing the On/O buttons
i
(6) and holding it down until the Battery Status LED (3) goes out.
Choice of microphones
Mino contains two microphone options: one omnidirectional and one directional
microphone.
You can switch between omnidirectional and directional microphone reception
by pressing the
M button (5). The omnidirectional microphone is indicated by
the Microphone LED (2) lighting up green and the directional microphone by it
lighting up orange.
With the directional microphone you can ”point” towards the sounds source that
you are interested in listening to while reducing sound from other directions. This
is particularly useful in difficult listening situations, e.g. in crowds or in very noisy
environments.
Telecoil/T position
The built-in telecoil is angled at 45 degrees in order to catch inductive signals from
an inductive loop both when Mino is in the horizontal position (in the hand or on a
table) and in the vertical position (on a clip or neck strap).
The T position can be used in premises where an inductive loop (or hearing loop)
has been fitted. Look for the inductive loop symbol or ask staff whether there is an
inductive loop if you are unsure. The T position is indicated by the indicator for the
external sound source lighting up green.
Selecting the signal source
It is easy to select the sound source.
The user can manually choose between the internal microphone (MIC position) or
built-in telecoil (T position) by pressing the buttons
M(5) and T (7) on the front.
When switching between signal sources, the volume control will be set automati-
cally to a low level to avoid unpleasant sound levels.
Mino automatically selects the input for the external sound source (16) when
something is connected. When you remove the connector, Mino will automatically
return to the internal microphone (
M position).
External sound source
If the audio cable (which has a small 2.5 mm jack plug on one end) is connected to
the external sound source input (16), the internal microphone will be disconnected
and the external sound source will be automatically selected. The External Sound
LED (4) will light up green and orange at the same time to indicate that the sound is
coming from an external sound source.
If the audio cable is disconnected, the sound will be reconnected to the internal
microphone again.
With the audio cable connected to a TV, hi- equipment, MP3 player or similar
sound source, you can listen to absolutely rst class stereo sound.
The input sensitivity is automatically adjusted to suit dierent sound sources.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bellman Symfon BE2030 - Mino at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bellman Symfon BE2030 - Mino in the language / languages: English as an attachment in your email.

The manual is 1,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bellman Symfon BE2030 - Mino

Bellman Symfon BE2030 - Mino User Manual - German - 11 pages

Bellman Symfon BE2030 - Mino User Manual - Dutch - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info