747147
3
Zoom out
Zoom in
Previous page
1/11
Next page
20
21
EN
1 Internal microphone
2 Internal microphone setting LED
Green: Omnidirectional microphone
Orange: Directional microphone
3 Battery status LED
Green: Switched on with well
charged battery
Blinking Green: Switched on but
the battery charge is low
Blinking Orange: Switched on with
at battery - will soon switch itself o
Orange: Charging
4 External sound source input LED
Green: T position
Orange: External mic
Orange and Green: Line in (stereo)
5 Button for selecting internal
microphone
6 On/o button
7 Button for selecting T position
8 Volume and Tone LED Indicator
9 Button for increasing sound level
10 Button for reducing sound level
11 Button for reducing treble
12 Button for increasing treble
13 Headphone output 3.5 mm jack
plug
14 Charging socket
15 Clip
16 External sound source input
2.5 mm jack plug
Figure references Getting started
Testing
1 Connect the Headphones to the headphone output (13).
2 Give one short press on the On/O button
i
(6) to start Mino.
3 Listen to the internal microphone and adjust the volume using
the Volume Buttons (
+ 9 or - 10).
Mino always starts with the internal microphone (1) selected as the sound source.
In addition, the volume control is always set to low volume to avoid unpleasant
sound levels.
The volume control adjusts the sound level by
+(9) raising and - (10) lowering
the volume while the Volume and Tone LED Indicator (8) shows the sound level.
The more LEDs that are lit, the higher the volume. The LED indicator goes out 5
seconds after the sound volume has been set.
The tone control adjusts the sound quality by
> (12) increasing and < (11) reducing
the treble. The Volume and Tone LED Indicator (8) shows the tone setting. The LED
indicator goes out 5 seconds after the sound quality has been set.
When you have nished, you can switch o Mino by pressing the On/O button
i
(6) and holding it down until the Battery Status LED (3) goes out.
How to use the Bellman Audio Mino
The BE2030 Bellman Audio Mino Personal Amplier is a digital
comunicator which has been specically developed to provide an exceptional
sound experience even in demanding situations. The Bellman Audio Mino works
extremely well for speech and music. You can use the built-in microphones or
use an external sound source. As an external sound source you can choose an
inductive loop, an external microphone or you can connect the Stereo Cable Set
to a stereo sound source.
Symbols and indicators
The following symbols are used in the user manual and can be explained as fol-
lows:
The warning triangle indicates information which must be followed in
order to guarantee operation and also in some cases to ensure personal
safety.
The light bulb (tip, note) indicates information which can be useful to help
you get the most out of the product.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bellman Symfon BE2030 - Mino at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bellman Symfon BE2030 - Mino in the language / languages: English as an attachment in your email.

The manual is 1,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bellman Symfon BE2030 - Mino

Bellman Symfon BE2030 - Mino User Manual - German - 11 pages

Bellman Symfon BE2030 - Mino User Manual - Dutch - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info