515398

Bellman Domino Classic BE 2250 Manual

14
Zoom out
Zoom in
Previous page
1/19
Next page
316 317
APP
Testing
It is easy to test the Bellman Audio Domino Classic Personal Hearing System. If
the Bellman Audio Domino Classic does not operate as described below, you
can carry out further troubleshooting as instructed under Troubleshooting.
How to test
The testing of Bellman Audio Domino Classic has been divided into three parts.
One part for the Receiver Unit for which only the Receiver Unit is required, one
part for the Transmitter Unit for which both units are required and nally one
for charging the two units.
Receiver Unit
• Switch on the unit and make sure that the Battery Status LED (3) lights up green.
• Connect the headphones to the Headphone Socket (13) and scrape carefully
on the round microphone (1) with your nger and check that there is a scraping
sound in the headphones.
• Press the buttons (9, 10, 11, 12) and check that the Volume and Tone Indicator
changes.
Transmitter Unit
• Switch on the unit and make sure that the Battery Status LED (17) lights up green.
Proceed as follows to pair up the units:
• Start both the units with the
On/O buttons i (6, 18).
• Go into the Settings Menu.
• Hold down the
CONNECT
button (19) on the Trans-
mitter Unit.
• Hold down both the M
button (5) and the R but-
ton (7) on the Receiver Unit.
A ”running light” on the Receiver Unit’s Volume and Tone LED Indicator (8)
moving towards the centre indicates that the link has been established.
Please note! If you pair up a Transmitter Unit and a Receiver Unit in the
Settings Menu, this replaces the pairing carried out in the factory. This can
be useful when changing a Transmitter Unit under guarantee or if you want
to pair up several Receiver Units to a Transmitter Unit (e.g. in a conference
room).
5 s
5 s
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bellman Domino Classic BE 2250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bellman Domino Classic BE 2250 in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info