515398

Bellman Domino Classic BE 2250 Manual

10
Zoom out
Zoom in
Previous page
1/19
Next page
68 69
DE
DK
EN
ES
FI
FR
IT
JP
NL
PL
SE
SI-CN
TR-CN
APP
If you want to go back to listening on the Transmitter Unit, press the R button
(7) and if you want to switch over to listening on the internal microphone, press
the M button (5) instead.
Wireless digital transfer
Bellman Audio Domino Classic uses the latest radio communications technol-
ogy to digitally transfer sound with an exceptionally high sound quality in
stereo. The radio transmission is encrypted to ensure the highest level of
security and condentiality.
Radio communication takes place on 2.4 GHz which is a frequency range
whose use is permitted throughout the world.
Battery indicator
The Battery Status LED (3, 17) normally lights up green. This indicates that the
unit is switched on and the battery level is satisfactory.
When the battery is low, the Battery Status LED (3, 17) blinks green until the
battery is almost completely at when it blinks orange instead. As soon as it
blinks green it is time to charge the unit again. If the unit is not charged, it is
switched o automatically.
Charging starts automatically when you connect a charger to the Charging
Socket (14, 21). Charging in progress is indicated on both the charger and
the units by an orange light. Once the battery is fully charged, the indicator
changes to green and the battery is continuously trickle charged until the
charger is disconnected.
Establishing a temporary link with another Transmitter Unit
The radio link between the Transmitter and Receiver Units in the Bellman Audio
Domino Classic must be established in order for radio communication to oper-
ate. To make it easy to get started, Receiver Units and Transmitter Units which
are supplied together are always paired up so that they will work together.
Whenever you want to listen on another Transmitter Unit you can establish a
temporary link with it. As soon as you switch o the Receiver Unit it returns to
working with the paired Transmitter Unit again. Proceed as follows to establish
a temporary radio link between a transmitter and a receiver:
• Start both the units with the On/O buttons (6, 18).
• Hold down
CONNECT (19) on the Transmitter Unit.
• Hold down both the M button (5) and the R button (7) on the Receiver Unit.
A ”running light” on the
Receiver Unit’s Volume
and Tone LED Indicator (8)
moving towards the centre
indicates that the link has
been established.
5 s
5 s
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bellman Domino Classic BE 2250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bellman Domino Classic BE 2250 in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info