747154
10
Zoom out
Zoom in
Previous page
1/15
Next page
Advanced programming
Advanced programming provides additional options for those who wish to make special
modications to the wrist receiver.
The idea is that it should be possible to select a completely unique signal pattern which is
linked to activation from a specic input on a specic transmitter. The function works regard-
less of the radio key settings on the units that are programmed. Please note that, for safety
reasons, the function does not work with the Visit smoke alarm transmitter.
By using advanced programming of the wrist receiver, it can be adjusted so that its signal
pattern corresponds exactly to what is required. In other words, an entirely individual signal
pattern can be programmed, such as displaying a permanently lit orange LED and a constant
vibration.
In order to adjust the setting, the transmitter to which the wrist receiver should be adapted
must be available. The transmitter must also be connected so that it can be activated in the
way in which it is intended to be used.
Proceed as follows
1 Hold down the function button (1) on the wrist receiver until the green (3) and yellow
(4) LEDs blink alternately. The wrist receiver will now be in programming mode for
about 30 seconds.
2 Hold down the function button (1) at the same time as the relevant transmitter is acti-
vated in the way in which it is intended to be used. The yellow LED (6) will light up.
Note that all inputs are individual, so that it is not possible to use the test button on the
telephone transmitter whose telephone input will indicate the relevant pattern.
3 Scroll through the dierent LED options by a short press on the function button (1). Select
the relevant indication by holding down the function button (1) until the LED (6) goes
out and starts to shine with a constant yellow light again.
4 Scroll through the dierent vibration options by a short press on the function button (1).
Select the relevant indication by holding down the function button (1) until the LED (6)
goes out and starts to shine with a constant yellow light again.
5 The wrist receiver will now show the indication method programmed. End the display
with a short press of the function button (1).
6 After a short while the wrist receiver will automatically return to normal mode.
Resetting advanced programming
It is quite easy to reset the wrist receiver if it needs to be reset after it has been programmed
116
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bellman BE1560 Visit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bellman BE1560 Visit in the language / languages: Dutch as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bellman BE1560 Visit

Bellman BE1560 Visit User Manual - English - 9 pages

Bellman BE1560 Visit User Manual - German - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info