747155
4
Zoom out
Zoom in
Previous page
1/4
Next page
Troubleshooting
If Try this
The transmitter LEDs blink in
red every minute
This means that the power adapter is disconnected, and the backup battery level is low.
Make sure that the power adapter is connected to mains.
Remove the cover and replace the batteries. Only use 1.5 V AA (LR6) alkaline batteries.
The Visit receiver doesn’t
respond when the landline
phone rings or when an
accessory is triggered
Start by pressing both test buttons on the transmitter to send a signal to your Visit receiver.
If the transmitter LED lights up in green, try the following:
Move the Visit receiver closer to the transmitter to make sure it’s within Visit radio range.
Make sure that the batteries on your Visit receiver are not depleted and / or that it is
connected to mains power.
Make sure all cables between the transmitter and the accessories are properly connected.
Make sure the units are set to the same radio key, see Changing radio key on BE1431.
If the transmitter LED doesn’t light up in green, try the following:
Make sure that the power adapter is connected and that the backup batteries are not
depleted. If the LED still doesn’t light up in green, contact your retailer for information on
warranty and service.
The Visit receiver doesn’t
respond when the mobile
phone rings or receives a
message.
Start by checking that the activity you have chosen on the app home screen alerts for
incoming calls and messages on your device, see Using the app. Continue by pressing
both test buttons on the transmitter.
If the transmitter LED lights up in green, try the following:
Start by checking the Bluetooth connection on the app home screen. If the top right house
icon is red and crossed out, try the following:
Move the mobile phone closer to the transmitter to make sure it’s within Bluetooth
range (approx. 10 meters).
Swipe to open the Control Center / Quick Settings Panel and tap the Bluetooth icon to
turn Bluetooth o and on.
Force-quit the app and open it again. Note: It’s not enough to just close it.
Check compatibility with third-party apps like Messenger, Skype, WhatsApp, WeChat
or Line. Depending on model, your mobile phone may fail to forward notications for
calls and messages to your Visit system. Test the app by asking someone to call or send
a message via the app. If your Visit receiver isn’t activated (even though the selected
activity is pre-set to forward the notication), the third-party app may be incompatible.
If the Visit receiver still doesn’t respond, try the following:
Move the Visit receiver closer to the transmitter to make sure it’s within Visit radio range.
Make sure that the batteries on your Visit receiver are not depleted and/or that it is
connected to mains power.
Make sure the units are set to the same radio key, see Changing radio key on BE1431.
If the transmitter LED doesn’t light up in green, try the following:
Make sure that the power adapter is connected. If the LED still doesn’t light up in green,
contact your retailer for information on warranty and service.
The Visit receiver is activated
for no apparent reason
Start by checking if the Activity you have chosen on the app home screen produces Visit
alerts for events in your mobile phone that you don’t want, see Using the app.
If thats not the case, a nearby Visit system might trigger your system. Change the radio
key on all Visit units, see Changing radio key on BE1431.
Visit Bluetooth telephone transmitter
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bellman BE1432 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bellman BE1432 in the language / languages: English as an attachment in your email.

The manual is 0,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bellman BE1432

Bellman BE1432 User Manual - German - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info