747165

Bellman BE1210 Manual

6
Zoom out
Zoom in
Previous page
1/13
Next page
Unsuitable Locations
Do not place the CO alarm in any of the following areas.
In the immediate vicinity of a cooking appliance (keep it at least 3 ft (1 m) horizontally from it).
Outside the building.
In an enclosed space (e.g. in or below a cupboard).
In a damp or humid area or directly above a sink, stovetop or oven.
Next to a door, window, air vent or anywhere that it could be aected by draughts.
Next to a ceiling or exhaust fan or air conditioning vents.
Over heat sources such as radiators or heating vents.
Where it would be obstructed, e.g. by curtains or furniture.
In an area where the temperature could drop below 32°F (0°C) or rise above 104°F (40°C).
Where dirt or dust could block the sensor.
Where it could be easily knocked, damaged or accidentally turned o or removed.
In a bathroom or other areas where the CO alarm may be exposed to water splashes, drip-
ping or condensation.
Near paint, thinners, solvent fumes or air fresheners.
A room with a fuel burning appliance, see Figure 1
If it is mounted on a wall, it should be located at a height greater than the height of any door
or window but still be at least 0.5 ft (150 mm) from the ceiling.
If it is mounted on the ceiling it should be at least 1 ft (300 mm) from any wall or light xture.
The CO alarm should be a horizontal distance of between 5 – 10 ft (1.5 – 3 m) from the
potential CO source.
If there is a partition in the room, the CO alarm should be located on the same side of the
partition as the potential source of carbon monoxide.
In rooms with sloped ceilings and fuel burning appliances, the CO alarm should be located
at the high side of the room, see Figure 2.
9 10
1ft, 150 mm
1ft, 300mm CO alarm CO alarm
5–10ft
1–3m
Dead air,
don’t locate
here
Figure 1
Room with a fuel
burning appliance
Figure 2
Rooms with sloped
ceilings
Figure 3
Bedrooms/rooms remote from source
1ft, 300mm CO alarm
CO alarm
3–6.5ft
1–2m
5–10ft
1–3m
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bellman BE1210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bellman BE1210 in the language / languages: English as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info