515411

Bellman Audio Mino - BE2030 Manual

24
Zoom out
Zoom in
Previous page
1/124
Next page
24
External microphone
You can connect an external microphone to the external sound source input (16).
The External Sound LED (4) will light up orange at the same time to indicate that
the sound is coming from an external microphone.
The input sensitivity is automatically adjusted to a suitable amplication when
an external microphone is connected.
Combined signal sources
When you are listening via an External Sound Source/telecoil, this sound can be
combined with the sound that the internal microphone is receiving.
Choose to listen to the External Sound Source by pressing the T button (7).
Hold down the
M button (5) until both the MIC LED (2) and T LED (4) light up.
The sound from the external sound source/telecoil is now mixed with the sound
from the internal microphone. You can adjust the balance between the external
sound/sound from the telecoil and the internal microphone by holding down the
M button (5) at the same time as setting the balance using the < (11) or >(12)
button.
If you want to go back to listening to external sound, press the T button (7) and
if you want to switch over to listening on the internal microphone, press the
M
button (5) instead.
Battery indicator
The Battery Status LED (3) normally lights up green. This indicates that the unit is
switched on and the battery level is satisfactory.
When the battery is low, the Battery Status LED (3) blinks green until the battery
is almost completely at when it blinks orange instead. As soon as it blinks green,
it is time to charge the unit again. If the unit is not charged, it is switched o
automatically.
Charging starts automatically when you connect a charger to the Charging Socket
(14). Charging in progress is indicated on the unit by an orange light. Once the
battery is fully charged, the indicator changes to green and the battery is
continuously trickle charged until the charger is disconnected.
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bellman Audio Mino - BE2030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bellman Audio Mino - BE2030 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 6,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info