571729
47
Zoom out
Zoom in
Previous page
1/100
Next page
47
Bell res English
Installation instructions
Wall-mounted appliance: Operation (gas regulator block (and receiver)) under the
appliance:
The gas connection Ø12 mm (3/8”) is situated on the under-
side of the appliance.
Use only gas piping with a minimum diameter of 1/2” and a shut-off valve.
1.6.4 Operating unit (Built-in appliance)
If the appliance is fi tted with an operating unit comprising gas control block and receiver,
this will be located, once it has been built in, at a maximum of 50 cm from the left or
right hand side of the appliance.
1.6.5 Convection package connections
When fi tting a convection package (= convection casing and convection set (1x)),
consideration should be given to the openings at approximately 1 meter above the
appliance for the warm air exiting grids.
1.7 POSITIONING THE APPLIANCE
Important: BUILT-IN APPLIANCE:
The appliance may only be installed in a fi replace consisting of
non-fl ammable material.
The fi replace is constructed on a suffi ciently solid fl oor that
can bear the weight of the appliance.
Ensure a free space of at least 1 cm between the bottom of
the appliance and the fl oor.
Min.1 cm
Figure 15: A clearence of at least 1 cm must be maintained between
the bottom of the appliance and the fl oor.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bellfires View Bell Vertical 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bellfires View Bell Vertical 3 in the language / languages: English as an attachment in your email.

The manual is 3.22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bellfires View Bell Vertical 3

Bellfires View Bell Vertical 3 User Manual - English - 32 pages

Bellfires View Bell Vertical 3 Installation Guide - German - 116 pages

Bellfires View Bell Vertical 3 User Manual - German - 32 pages

Bellfires View Bell Vertical 3 Installation Guide - Dutch - 100 pages

Bellfires View Bell Vertical 3 User Manual - Dutch - 28 pages

Bellfires View Bell Vertical 3 Installation Guide - French - 100 pages

Bellfires View Bell Vertical 3 User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info