571729
18
Zoom out
Zoom in
Previous page
1/32
Next page
18
Bell res English
Instructions for use
Figure 4: Gas regulating block
Possible error messages:
* 3 seconds: short beeps, audible when the motor-knob operates:
Receiver batteries need changing soon (having heard this signal, the
appliance can be ignited another ten times approximately).
* 5 seconds: unbroken beeps:
Error. For example, one of the cables may not be properly connected.
Important: If the pilot fl ame goes out, then wait for
at least 5 minutes before repeating the
above procedure.
Important: If the pilot fl ame goes out for any reason, wait for 5 minutes
before attempting to re-light it.
If the pilot light does not ignite after 3 ignition attempts;
close the gas tap and warn the fi tter.
Once the pilot light is burning, the main burner must ignite
within 10 seconds automatically.
If this does not happen, immediately close the gas tap and
warn the fi tter.
If the main burner ignites with a pop; immediately close the
gas tap and warn the fi tter.
Motor-knob
Microswitch8-wire Receiver Jack
Pilot gas adjustment screw
(Factory set) (Puncture the casing
with a small screwdriver)
Adjustment screw
Maximum burner pressure
(Factory set and sealed)
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bellfires View Bell Vertical 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bellfires View Bell Vertical 3 in the language / languages: English as an attachment in your email.

The manual is 1.1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bellfires View Bell Vertical 3

Bellfires View Bell Vertical 3 Installation Guide - English - 100 pages

Bellfires View Bell Vertical 3 Installation Guide - German - 116 pages

Bellfires View Bell Vertical 3 User Manual - German - 32 pages

Bellfires View Bell Vertical 3 Installation Guide - Dutch - 100 pages

Bellfires View Bell Vertical 3 User Manual - Dutch - 28 pages

Bellfires View Bell Vertical 3 Installation Guide - French - 100 pages

Bellfires View Bell Vertical 3 User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info