645680
58
Zoom out
Zoom in
Previous page
1/92
Next page
58
Bell res English
Installation instructions
Position the two fi tting boxes in the fi replace, at a minimum distance of 30 cm
under the ceiling. Mount the other end of the aluminium pipes onto the fi tting boxes.
To do this use the hose clamps supplied. When the fi replace is completely fi nished,
mount the grilles onto the fi tting boxes.
Within a range of 30 cm either side and 50 cm above the escape
opening of the fi replace, there must be no fl ammable materials
(e.g. wooden ceiling, fi tted furniture).
1.7.3 Building in the appliance
Remove the front of the casing, if applicable. (See Chapter 4: Dismantling / Assembling
of the glass.)
Decide on positions of the vents (grilles above and below the fi replace) and, if applica-
ble, the hot air grids of the convection package.
The brickwork must be built up around the appliance. In connection with the appliance
expanding during burning: there must be at least 3 mm clearance on either side of the
appliance. Do not build up the brickwork farther than the angle irons/brackets (keep in
mind the thickness of any plastering!).
Do not use masking tape on the appliance when installing
and plastering.
Tape can damage the fi nish of the appliance.
Connect up the convection package, if applicable. See 1.7.2.1.
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bellfires VIEW BELL TOPSHAM 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bellfires VIEW BELL TOPSHAM 3 in the language / languages: English as an attachment in your email.

The manual is 2.6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bellfires VIEW BELL TOPSHAM 3

Bellfires VIEW BELL TOPSHAM 3 User Manual - English - 36 pages

Bellfires VIEW BELL TOPSHAM 3 Installation Guide - German - 108 pages

Bellfires VIEW BELL TOPSHAM 3 User Manual - German - 36 pages

Bellfires VIEW BELL TOPSHAM 3 Installation Guide - Dutch - 92 pages

Bellfires VIEW BELL TOPSHAM 3 User Manual - Dutch - 36 pages

Bellfires VIEW BELL TOPSHAM 3 Installation Guide - French - 92 pages

Bellfires VIEW BELL TOPSHAM 3 User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info