571723
14
Zoom out
Zoom in
Previous page
1/28
Next page
14
Bell res English
Instructions for use
Set the current time
The time display will fl ash after either:
a installing the battery or
b simultaneously pressing the
(large fl ame) and
(small fl ame).
While the screen is fl ashing, you can adjust the time.
Press
(large fl ame) to set the hour and
(small fl ame)
to set the minute.
Wait or press OFF to return to mode.
Set the display - °C/24 hour or °F/12 hour Clock setting
Connect the batteries. By simultaneously pressing OFF and
(small fl ame), can be switched from °F (and 12 hour clock)
to °C (and 24 hour clock), or vice versa.
The display will automatically return to mode after some
time, but you may immediately return to mode by
pressing the OFF button.
Important: Setting up signal code before using the appliance for the fi rst time.
Before the appliance can be used, the receiver must fi rst learn the hand-held
transmitter’s signal code.
Press the RESETbutton on the receiver, and keep this pressed until 2 audio signals
are heard. See fi gure 3.
Release the “RESETbutton after the second (somewhat longer) audio signal.
Press, within 20 seconds, the
(small fl ame) button on the hand-held transmitter,
until 2 short signals are heard
.
The signal code has now been set up on the receiver
.
If, however, a single long sound is heard, this means that setting the signal code has
failed or that the wiring has been connected incorrectly.
You only need to set up the signal code once. It is not necessary when changing the
batteries of the hand-held transmitter or receiver.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bellfires View Bell Derby 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bellfires View Bell Derby 3 in the language / languages: English as an attachment in your email.

The manual is 0.77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bellfires View Bell Derby 3

Bellfires View Bell Derby 3 Installation Guide - English - 92 pages

Bellfires View Bell Derby 3 Installation Guide - German - 108 pages

Bellfires View Bell Derby 3 User Manual - German - 28 pages

Bellfires View Bell Derby 3 Installation Guide - Dutch - 92 pages

Bellfires View Bell Derby 3 User Manual - Dutch - 28 pages

Bellfires View Bell Derby 3 Installation Guide - French - 92 pages

Bellfires View Bell Derby 3 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info