Manual Bellfires UNICA-2 55 (page 15 of 48) (Dutch)

571720

Zoom out

Zoom in

1/48

Bellﬁ res

Installatievoorschrift

Nederlands

Het metselwerk dient rond de haard opgetrokken te worden. In verband met uitzetting

van de haard tijdens het stoken: minimaal 3 mm speling aan weerszijden van het toestel

houden. Niet verder metselen dan tot de bovenzijde van de haard (houdt tevens

rekening met dikte stucwerk!).

Het toestel wordt optioneel geleverd met een recht boezemijzer voor plaatsing in een

vlakke wand of schouw. Het boezemijzer dient om het metselwerk boven de haard op

te metselen. Het boezemijzer moet links en rechts op het metselwerk rusten zodat

vervolgens omhoog gemetseld kan worden. Het metselwerk mag dus niet op de haard

geplaatst worden, maar moet ongeveer 3 mm vrijgehouden worden in verband met het

gewicht.

Tussen de bovenzijde van het toestel en de onderzijde van het boezemijzer dient een

hittebestendig afdichtkoord gelegd te worden, zodat het toestel ook in de hoogte kan

uitzetten.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bellfires UNICA-2 55 in the language / languages: Dutch as an attachment in your email.

The manual is 1,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bellfires UNICA-2 55

Bellfires UNICA-2 55 Usermanual and installation guide - Dutch - 28 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bellfires UNICA-2 55 Manual

Product: