645675
48
Zoom out
Zoom in
Previous page
1/68
Next page
48
Bell res English
Installation instructions
Convection air appliance / convection fan (option)
° Check the convection air route and the functioning of the convection fan
(option).
° Turn off the power to the appliance.
° Clean the convection air intake openings, channels and outfl ow openings.
° Clean the inside of the convection fan chamber.
The convection fan is accessible after removing/dismantling the main burner
and grills, at the rear/bottom of the combustion chamber.
Ambient lighting
° Disconnect the power to the appliance.
° Remove the embers, fi re glass, decorative ash and ceramic log set from the
main burner and two grates.
° Carefully clean the ambient lamps.
Replacing of the ambient lamps when broken
° Remove the embers, fi re glass, decorative ash and ceramic log set from the
main burner and two grates.
° Carefully unscrew the broken light bulbs from the ceramic fi tting.
° Carefully turn the new light bulbs, left and right, in the ceramic fi ttings.
Use only the Bellfi res Fire Glow light bulb.
° Turn the Fire Glow light bulbs completely into the socket
° Position the grates, ceramic log set, embers, fi re glass and decoration
according to the instructions in chapter 2.1.4. Fit the glass according to the
instructions in chapter 5.
° Plug the unit into the wall socket.
° Check the operation of the lamps using the remote control.
See Instructions for use, Operation light / dimmer.
Outside appliance
° Clean the outside of the appliance with a dry, lint-free cloth.
° Only when the appliance has cooled, it can be cleaned. Never use abrasive,
corrosive agents or fi replace cleaner.
° Any damage to paintwork can repaired with an aerosol BELLFIRES heat-
resistant paint. (Note that the appliance has suffi ciently cooled down !)
General
° Parts:
Individual parts for replacement or accessories are available from your
BELLFIRES-dealer. Use only original parts.
° Modifi cations:
Introduced modifi cations to the appliance are not permitted.
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bellfires SMART BELL 90-80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bellfires SMART BELL 90-80 in the language / languages: English as an attachment in your email.

The manual is 2.51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bellfires SMART BELL 90-80

Bellfires SMART BELL 90-80 User Manual - English - 36 pages

Bellfires SMART BELL 90-80 Installation Guide - German - 76 pages

Bellfires SMART BELL 90-80 User Manual - German - 36 pages

Bellfires SMART BELL 90-80 Installation Guide - Dutch - 68 pages

Bellfires SMART BELL 90-80 User Manual - Dutch - 36 pages

Bellfires SMART BELL 90-80 Installation Guide - French - 68 pages

Bellfires SMART BELL 90-80 Installation Guide - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info