812743
14
Zoom out
Zoom in
Previous page
1/32
Next page
4 Operation
4.1 Preparation before first use
4.1.1 Do a check on the appliance
1. Make sure that the appliance is not damaged.
2. Make sure that the glass is not damaged.
3. Make sure that the pilot light operates correctly.
4.1.2 Prepare the appliance
Warning:
Do not use the appliance for 4 weeks after installation. This time is
necessary for the building materials to set.
Make sure that there is sufficient ventilation in the room in which the
appliance is installed.
Note: The appliance has a heat-resistant coating. When you use the
appliance for the first time, the coating can cause an unpleasant, but harmless
smell.
1. Start the appliance, refer to section
4.3
.
2. Set the flame height to maximum, refer to
4.3
.
3. Keep the flame height to maximum for 10 minutes to make sure the chimney
becomes warm.
4. Use the appliance with maximum flame height for several hours to remove the smell
of the coating.
5. When the appliance is cool, clean the appliance. Refer to
5.2
.
4.1.3 Connect the receiver with the remote control
Note:
You only have to connect the receiver once. Even when you change the
batteries, the remote control stores the settings.
1. On the receiver, push and hold the reset button until you hear two beeps.
2. Within 20 seconds of the second beep, push and hold the down button on the remote
control until you hear two short beeps. If you hear one long beep the receiver is not
set, try again.
The receiver is connected.
4.1.4 Start the appliance
Warning:
Keep a minimum distance of 100 cm of the appliance when you start the
pilot light.
When the pilot light goes out, always wait 5 minutes before you start it
again.
Operation
14 Smart Bell 75-55
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bellfires Smart Bell 75-55 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bellfires Smart Bell 75-55 in the language / languages: English as an attachment in your email.

The manual is 4.94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bellfires Smart Bell 75-55

Bellfires Smart Bell 75-55 Additional guide - English - 48 pages

Bellfires Smart Bell 75-55 Installation Guide - English - 44 pages

Bellfires Smart Bell 75-55 Additional guide - German - 48 pages

Bellfires Smart Bell 75-55 Installation Guide - German - 52 pages

Bellfires Smart Bell 75-55 User Manual - German - 36 pages

Bellfires Smart Bell 75-55 Additional guide - Dutch - 48 pages

Bellfires Smart Bell 75-55 Installation Guide - Dutch - 52 pages

Bellfires Smart Bell 75-55 User Manual - Dutch - 36 pages

Bellfires Smart Bell 75-55 Additional guide - French - 48 pages

Bellfires Smart Bell 75-55 Installation Guide - French - 48 pages

Bellfires Smart Bell 75-55 User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info