812741
7
Zoom out
Zoom in
Previous page
1/48
Next page
4
4Requirements
4.1 Requirements on the location
Never use combustible building materials for the fireplace.
Do not install the appliance against a flammable rear wall.
Install a nonflammable insulation plate of at least 12 mm between the appliance and
the rear wall. The insulation plate must cover the entire area of the rear of the
appliance.
The appliance must be installed approximately 2 cm from the rear wall.
If the fire burns in the appliance, make sure that the floor temperatures below and in
front of the appliance cannot be higher than 85 °C .
Make sure that the room where the appliance is installed is properly ventilated.
4.2 Other requirements
The gas supply connection is located under in the appliance for an easy connection to
all directions.
Only use gas piping of at least 1/2" and a shut-off valve to connect the gas supply to
the gas regulator block of the appliance.
Make sure that there is a wall socket with earth connection nearby the appliance. The
socket must be accessible at all times. The powercable (+ 0.5 m) is coming from the
rear of the appliance.
Install the fireplace on a solid floor that can bear the weight of the appliance and the
fireplace.
If the floor is made of flammable material, take correct safety measures. Install a
temperature protection plate made of nonflammable material between the appliance
and the floor.
The appliance must be installed into an existing open fireplace or as a built-in
appliance in a new fireplace.
If the concentric flue system is installed in a chimney that is used for wood or coal fire,
clean the chimney.
If you built a new fireplace, make sure that it is ventilated with vents at the bottom and
top of the fireplace. If the fireplace is not ventilated the temperature of the appliance
can increase to dangerous temperatures and damage the fireplace.
Keep a minimum distance between the appliance and a front wooden fireplace
surround; with a depth of less than 10 cm, of:
5 cm on the sides: (minimum distance: side appliance - leg wooden fireplace
surround)
40 cm at the top: (minimum distance: top appliance - bottom of beam wooden
fireplace surround) The temperature on the underside of the beam of the wooden
fireplace must never exceed 85°C. Optional: insulate the bottom of the wooden
beam with a fireproof plate.
4.3 Requirements on the outlet
4.3.1 Requirements on the roof outlet
Make sure that the outlet is installed at least 0.5 meter from the edge of the roof.
Note:
All the minimum distances are guidelines. Consult your national and local
directives for the exact minimum distances.
Requirements
Smart Bell 65-55
7
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bellfires Smart Bell 65-55 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bellfires Smart Bell 65-55 in the language / languages: English as an attachment in your email.

The manual is 1.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bellfires Smart Bell 65-55

Bellfires Smart Bell 65-55 Installation Guide - English - 44 pages

Bellfires Smart Bell 65-55 User Manual - English - 32 pages

Bellfires Smart Bell 65-55 Additional guide - German - 48 pages

Bellfires Smart Bell 65-55 Installation Guide - German - 52 pages

Bellfires Smart Bell 65-55 User Manual - German - 36 pages

Bellfires Smart Bell 65-55 Additional guide - Dutch - 48 pages

Bellfires Smart Bell 65-55 Installation Guide - Dutch - 52 pages

Bellfires Smart Bell 65-55 User Manual - Dutch - 36 pages

Bellfires Smart Bell 65-55 Additional guide - French - 48 pages

Bellfires Smart Bell 65-55 Installation Guide - French - 48 pages

Bellfires Smart Bell 65-55 User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info