645679
38
Zoom out
Zoom in
Previous page
1/84
Next page
38
English
Installation instructions
Figure 18: Operating unit


Operating unit
Frame with
door (white)
Remove the decorative edging and door of the operating unit.
Fit the separate operating unit, where the gas regulator block and receiver will be
placed, on max. 50 cm from the appliance.
The burner, gas regulator block and receiver have been fully factory assembled.
Disconnect the bracket with the gas regulator block and receiver from the appliance.
Carefully move the bracket with the gas regulator block, receiver, pipes and cables to
the operating unit. Mount the bracket at the bottom of the operating unit.
Important: Take care that no pipes get damaged and no compression ! ttings
come loose when moving the gas regulator block. Prevent twisting
the " exible pipes# Check all compression ! ttings for leaks
afterwards#
Mount the receiver in the top of the operating unit. Check afterwards that all electric
connections are properly connected.
General:
Route all piping and cables from the operating unit to the appliance through an easily
accessible hollow cavity.
During subsequent installation of the operating unit, protect the gas regulator block and
piping against encasement by cement etc.
Important : Cement and chalk can damage
the piping and can, in turn,
lead to gas leaks.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bellfires ROOM DIVIDER MEDIUM 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bellfires ROOM DIVIDER MEDIUM 3 in the language / languages: English as an attachment in your email.

The manual is 5.9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bellfires ROOM DIVIDER MEDIUM 3

Bellfires ROOM DIVIDER MEDIUM 3 User Manual - English - 36 pages

Bellfires ROOM DIVIDER MEDIUM 3 Installation Guide - German - 100 pages

Bellfires ROOM DIVIDER MEDIUM 3 User Manual - German - 36 pages

Bellfires ROOM DIVIDER MEDIUM 3 Additional guide - Dutch - 100 pages

Bellfires ROOM DIVIDER MEDIUM 3 Installation Guide - Dutch - 84 pages

Bellfires ROOM DIVIDER MEDIUM 3 User Manual - Dutch - 36 pages

Bellfires ROOM DIVIDER MEDIUM 3 Installation Guide - French - 84 pages

Bellfires ROOM DIVIDER MEDIUM 3 User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info